10 color 12 station M&R Challenger

sieggysrv · February 9th, 2014, 10:23 PM

Quote:

Originally Posted by anson578

In 94 they had the Tol-o-matic Index drive. The tol-o-matic stroke cylinder didn't start until 95. The single cylinder as you call it was still used on many of M&R presses throughout the late 90's and early 00's. I have a 99 Terminator with the " single cylinder ".
In 93 they still had machines with the high profile pallet locks, so it is possible they still produced some of their presses with the high profile

Nice Try but Wrong by 94 they were not using the single cylinder for heads and they were using tol-o-matic cylinders for heads and by 93 they were using low profile pallet arms not high rise ones and there are no mighty tykes on the screen holders as well and they were also being use by 93 so get your years straight it is not a 94!

anson578 · February 10th, 2014, 05:37 PM

Quote:

Originally Posted by sieggysrv

Nice Try but Wrong by 94 they were not using the single cylinder for heads and they were using tol-o-matic cylinders for heads and by 93 they were using low profile pallet arms not high rise ones and there are no mighty tykes on the screen holders as well and they were also being use by 93 so get your years straight it is not a 94!

Which part of my owning a 99 w the single cyl did u not understand? If what you saying about single cyl being replaced by 93 then your off in a 7 yr span, which means you really don't know much about equipment and should give up. Now that would mean you denying 2 machines that say they were built in certain years. My first 4 in the serial is 0399 which means march of 99.

To: Miami Screen Print. What are your first 4 digits on your serial #?

Miami Screen Print Supply · February 21st, 2014, 09:55 AM

Quote:

Originally Posted by sieggysrv

Nice Try but Wrong by 94 they were not using the single cylinder for heads and they were using tol-o-matic cylinders for heads and by 93 they were using low profile pallet arms not high rise ones and there are no mighty tykes on the screen holders as well and they were also being use by 93 so get your years straight it is not a 94!

This machine has been sold. The first 4 digits on the serial number are 0994, this machine is a 1994. I do not appreciate sieggysrv saying that I need to get my years straight. I am an honest supply company that never has or ever would steer my customers wrong. I did not even post the year until I was 100% sure of the year and personally spoke to M&R. Thank you for your intense interest in my machinery, have a wonderful day.

danlilsade · February 21st, 2014, 11:40 AM

to find out the SN about any M&R machine look for the stamping on the top disk that print arm number one attaches to, the machine number is stamped there, for a while they used printed plastic nomenclature plates that the printing washed off of the first time solvent was used to clean it. You can call M&R with the machine number and get the SN.

Blasted · February 2nd, 2015, 12:07 AM

Quote:

Originally Posted by danlilsade

to find out the SN about any M&R machine look for the stamping on the top disk that print arm number one attaches to, the machine number is stamped there, for a while they used printed plastic nomenclature plates that the printing washed off of the first time solvent was used to clean it. You can call M&R with the machine number and get the SN.

Actually this is not true. Calling M&R with only the Machine number will get you no where.

M&R told us that that machine number stamp is used on many many different at once... Sad day for me.. But that problem has been overcome.