3 Embroidery machines 4 sale

jbanner · #1 January 12th, 2007, 08:07 PM

I have 3 embroidery machines for sale. 2 Tajimas and 1 Happy. They are in Irvine, CA. The picture is of machine #1.

Machine #1: Tajima TME-HC-912 I think it was built in 1993. This is a 9 color 12 head drop table machine. It is currently running and all heads/needles are functional. Trimmers are not working or are disabled, don't know which because we have never used them. This machine comes with a set of large hoops (full chest) and a set of small hoops (left chest). It also has cap drivers with it, but no cap frames. $11,000

Machine #2: Tajima TME-HC-612 I think it's also a 1993. This is a 6 color 12 head drop table machine. This machine needs some work... The trimmers are disabled or not working and some needles on a few heads are not working. I do not know what it will take to fix it, because we have never tried. Probably just broken needle or take-up drivers which should be simple to fix. The start/stop switches have been replaced with off the shelf switch boxes. This machine comes with a set of large hoops (full chest) and cap drivers but no cap frames. $6,000

Machine #3: Happy HCM-812-30T. This is a 12 head 8 color drop table machine. Don't know what year it was built, but it's newer than the other two for sure. This machine has seen only light use. When it was taken out of service all heads/needles were working but it was loosing registration. One of the pantagraph motors is not in synch with the computer. So, it may need a stepping motor or a control board of some sort, who knows. This machine comes with assorted hoops but I don't know the sizes/quantities... I can get an inventory if you are interested. $5,000

These machines have seen many years of production and they do show the cosmetic wear and tear that can be expected. These machines are all being sold as-is with no warranties or guarantees. I can arrange to load them on a flat bed for you, but shipping/pickup is your responsibility and they cannot be crated.

The prices listed above are for individual sale. I prefer to sell them as a package and would consider a much better deal if someone wants the whole package. Also, if sold as a package the Tajima machines will come with networking hardware that allows you to load designs directly from your computer (you may need to buy the software for this).

ezak · #2 January 14th, 2007, 10:22 PM

can you send me your phone number pls
Thanks

jbanner · #3 January 15th, 2007, 12:40 PM

Email sent.

GJC63kINTL · #4 January 22nd, 2007, 12:40 PM

Jbanner
interested in the embroidery machines

gnizitigid · #5 January 23rd, 2007, 02:44 AM

I have many embroidery, screen printing and artwork related clients for which i do digitiizng, color separation and artwrok design, somtimes they ask me for any reference for embroidery machines..........

I will be more than happy if you can send me the details and my email ID is gnizitigid@gmail.com

I have near 4 emails right now which has asked me about embroidery machines.

Embroman · #6 January 28th, 2007, 08:11 AM

Quote:

Originally Posted by jbanner

I have 3 embroidery machines for sale. 2 Tajimas and 1 Happy. They are in Irvine, CA. The picture is of machine #1.

Machine #1: Tajima TME-HC-912 I think it was built in 1993. This is a 9 color 12 head drop table machine. It is currently running and all heads/needles are functional. Trimmers are not working or are disabled, don't know which because we have never used them. This machine comes with a set of large hoops (full chest) and a set of small hoops (left chest). It also has cap drivers with it, but no cap frames. $11,000

Machine #2: Tajima TME-HC-612 I think it's also a 1993. This is a 6 color 12 head drop table machine. This machine needs some work... The trimmers are disabled or not working and some needles on a few heads are not working. I do not know what it will take to fix it, because we have never tried. Probably just broken needle or take-up drivers which should be simple to fix. The start/stop switches have been replaced with off the shelf switch boxes. This machine comes with a set of large hoops (full chest) and cap drivers but no cap frames. $6,000

Machine #3: Happy HCM-812-30T. This is a 12 head 8 color drop table machine. Don't know what year it was built, but it's newer than the other two for sure. This machine has seen only light use. When it was taken out of service all heads/needles were working but it was loosing registration. One of the pantagraph motors is not in synch with the computer. So, it may need a stepping motor or a control board of some sort, who knows. This machine comes with assorted hoops but I don't know the sizes/quantities... I can get an inventory if you are interested. $5,000

These machines have seen many years of production and they do show the cosmetic wear and tear that can be expected. These machines are all being sold as-is with no warranties or guarantees. I can arrange to load them on a flat bed for you, but shipping/pickup is your responsibility and they cannot be crated.

The prices listed above are for individual sale. I prefer to sell them as a package and would consider a much better deal if someone wants the whole package. Also, if sold as a package the Tajima machines will come with networking hardware that allows you to load designs directly from your computer (you may need to buy the software for this).

Hello I'm Intereted about buying on of your machines if you still have them for sale.
The Happy machine or the The 6 neddle Tajima please get back to me ASAP. Thanks
Email or call me at 330-898-8591

Embroman · #7 January 30th, 2007, 07:30 AM

Quote:

Originally Posted by jbanner

I have 3 embroidery machines for sale. 2 Tajimas and 1 Happy. They are in Irvine, CA. The picture is of machine #1.

Machine #1: Tajima TME-HC-912 I think it was built in 1993. This is a 9 color 12 head drop table machine. It is currently running and all heads/needles are functional. Trimmers are not working or are disabled, don't know which because we have never used them. This machine comes with a set of large hoops (full chest) and a set of small hoops (left chest). It also has cap drivers with it, but no cap frames. $11,000

Machine #2: Tajima TME-HC-612 I think it's also a 1993. This is a 6 color 12 head drop table machine. This machine needs some work... The trimmers are disabled or not working and some needles on a few heads are not working. I do not know what it will take to fix it, because we have never tried. Probably just broken needle or take-up drivers which should be simple to fix. The start/stop switches have been replaced with off the shelf switch boxes. This machine comes with a set of large hoops (full chest) and cap drivers but no cap frames. $6,000

Machine #3: Happy HCM-812-30T. This is a 12 head 8 color drop table machine. Don't know what year it was built, but it's newer than the other two for sure. This machine has seen only light use. When it was taken out of service all heads/needles were working but it was loosing registration. One of the pantagraph motors is not in synch with the computer. So, it may need a stepping motor or a control board of some sort, who knows. This machine comes with assorted hoops but I don't know the sizes/quantities... I can get an inventory if you are interested. $5,000

These machines have seen many years of production and they do show the cosmetic wear and tear that can be expected. These machines are all being sold as-is with no warranties or guarantees. I can arrange to load them on a flat bed for you, but shipping/pickup is your responsibility and they cannot be crated.

The prices listed above are for individual sale. I prefer to sell them as a package and would consider a much better deal if someone wants the whole package. Also, if sold as a package the Tajima machines will come with networking hardware that allows you to load designs directly from your computer (you may need to buy the software for this).

Hello I am Embroman@neo.rr.com could you email me and let me know what's going on with the Happy machine you have foe sale I've been waiting for you to let me knoe if you still have it for sale or not. Thank you

Embroman · #8 January 30th, 2007, 08:59 AM

Do you still have your happy machine for sell if so let me know Thanks. What's the lowest amout you are willing to take on this machine. If you still have it please send me some photo's of the machine.

Thank you

jbanner · #9 January 31st, 2007, 02:08 PM

Sorry, they have been sold.

crystaltechnology · #10 May 20th, 2007, 02:58 PM

Please send me more about the machine and the price.
Sirajul
Crystal Technology
crystaltechnology@gmail.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
melco embroidery machines for sale	rbas73	Used Embroidery Machines	7	January 15th, 2008 11:44 AM
(2) 4 Head Tajima Tmfxc904 Embroidery Machines For Sale	Eastcoast	Used Embroidery Machines	11	September 25th, 2007 05:27 PM
Barudan 15-head embroidery machines for sale	imperialtextile-rick	Used Embroidery Machines	3	August 23rd, 2006 07:51 PM
Bernina embroidery sewing machines	Rennie S	Embroidery and Digitizing	3	February 27th, 2006 11:59 AM