DigitSmith

Anatol Trident 6/8 year 2000 optical safety sensor missing

Reply
 
Thread Tools Search this Thread
Old February 3rd, 2012, 10:50 PM   #1 (permalink)
treex3 treex3 is offline
Junior Member

treex3's Avatar
Join Date:
Feb 2012
Location:
Santa Ana, CA
Posts:
24
Liked:
0 times
Default Anatol Trident 6/8 year 2000 optical safety sensor missing

Purchase Anatol Trident 6/8 year 2000 at auction and am in the process of getting it up and running. The problem that I am having is the Optical Laser safety sensors (the ones on each side of the load and unload pallets) were missing when I bought it. I need to purchase new sensors but I have no reference of how the wiring for the sensors are routed. Does anyone have this same press and willing to send me a pic of the sensor wiring?

Unfortunately when I contacted Anatol they seem to know very little about this press and cannot find a wiring diagram for this press.


Anatol Trident 6/8 year 2000 or so.

Send a private message to treex3 ContactReply & Quote
Old February 3rd, 2012, 11:35 PM   #2 (permalink)
Gilligan Gilligan is offline
Senior Member
Join Date:
Aug 2010
Posts:
517
Liked:
112 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing

The semi-local shop that has one of these has them tied up and out of the way because they end up getting tripped when loading and unloading shirts.
__________________
"you don't need a hook for the worms to dance."
Send a private message to Gilligan ContactReply & Quote
Old February 4th, 2012, 02:43 AM   #3 (permalink)
treex3 treex3 is offline
Junior Member

treex3's Avatar
Join Date:
Feb 2012
Location:
Santa Ana, CA
Posts:
24
Liked:
0 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing

I would do the same but the control panel gives a safety sensor error and press wont index without them unless anyone knows of a way to bypass the error?
Send a private message to treex3 ContactReply & Quote
Old February 4th, 2012, 09:15 AM   #4 (permalink)
spotcolorsupply spotcolorsupply is offline
Senior Member

spotcolorsupply's Avatar
Join Date:
Dec 2010
Posts:
168
Liked:
9 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing

I would start by tracing the wires from one of the safety bars. Itís basically a loop connection that breaks when one is actuated. The lasers are part of that loop... There are a few of these presses in Atlanta. If you give me a call or email I may be able to hook you up with one of the owners...
__________________
Brannon Mullins
Spot Color Supply
770-329-8243
2625 Jason Ind. Pkwy. #900
Winston, GA 30187
www.spotcolorsupply.com
[email address]

We Sell Workhorse Products, Black Body, and Blackline New, Along With Used Equipment, Ink, Film, Frames, And Re-Stretches!

Send a private message to spotcolorsupply ContactReply & Quote
Old February 4th, 2012, 10:45 AM   #5 (permalink)
treex3 treex3 is offline
Junior Member

treex3's Avatar
Join Date:
Feb 2012
Location:
Santa Ana, CA
Posts:
24
Liked:
0 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing

Brannon, the path of the wires seem to have gone the route to the power suppy judging by the cut zip ties. I will post up another pic soon.
Send a private message to treex3 ContactReply & Quote
Old February 4th, 2012, 02:32 PM   #6 (permalink)
treex3 treex3 is offline
Junior Member

treex3's Avatar
Join Date:
Feb 2012
Location:
Santa Ana, CA
Posts:
24
Liked:
0 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing


Here is a pic of the wiring of the press anyone have anything similar?
Send a private message to treex3 ContactReply & Quote
Old February 4th, 2012, 02:39 PM   #7 (permalink)
spotcolorsupply spotcolorsupply is offline
Senior Member

spotcolorsupply's Avatar
Join Date:
Dec 2010
Posts:
168
Liked:
9 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing

Quote:
Originally Posted by treex3 View Post

Here is a pic of the wiring of the press anyone have anything similar?
If Iím not mistaken the safety bars hook in on the distribution block on the far right side of the pic...
__________________
Brannon Mullins
Spot Color Supply
770-329-8243
2625 Jason Ind. Pkwy. #900
Winston, GA 30187
www.spotcolorsupply.com
[email address]

We Sell Workhorse Products, Black Body, and Blackline New, Along With Used Equipment, Ink, Film, Frames, And Re-Stretches!

Send a private message to spotcolorsupply ContactReply & Quote
Old February 4th, 2012, 03:11 PM   #8 (permalink)
treex3 treex3 is offline
Junior Member

treex3's Avatar
Join Date:
Feb 2012
Location:
Santa Ana, CA
Posts:
24
Liked:
0 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing

I believe that you are right brannon, but the question is where on the distribution block. if I could only see a pic of a press showing the wiring route of the sensors....
Send a private message to treex3 ContactReply & Quote
Old February 4th, 2012, 03:19 PM   #9 (permalink)
spotcolorsupply spotcolorsupply is offline
Senior Member

spotcolorsupply's Avatar
Join Date:
Dec 2010
Posts:
168
Liked:
9 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing

Quote:
Originally Posted by treex3 View Post
I believe that you are right brannon, but the question is where on the distribution block. if I could only see a pic of a press showing the wiring route of the sensors....
Give me a call on monday... I am working on one next week, and may be able to help!!
__________________
Brannon Mullins
Spot Color Supply
770-329-8243
2625 Jason Ind. Pkwy. #900
Winston, GA 30187
www.spotcolorsupply.com
[email address]

We Sell Workhorse Products, Black Body, and Blackline New, Along With Used Equipment, Ink, Film, Frames, And Re-Stretches!

Send a private message to spotcolorsupply ContactReply & Quote
Old February 4th, 2012, 03:44 PM   #10 (permalink)
treex3 treex3 is offline
Junior Member

treex3's Avatar
Join Date:
Feb 2012
Location:
Santa Ana, CA
Posts:
24
Liked:
0 times
Default Re: Anatol Trident 6/8 year 2000 optical safety sensor missing

Alright thanks I'll give you a call Monday your help is much appreciated.
Send a private message to treex3 ContactReply & Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


All times are GMT -4. The time now is 07:35 PM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.