ARO Ink Distribution Pump (for 55 Gallon Drums)

RZRevo · February 26th, 2018, 09:04 PM

ARO Ink Distribution Pump (for 55 Gallon Drums) Reduced to $6,000

This 4 ¼ inch chop/check type piston pump was specifically configured to distribute screen printing ink to multiple ink stations for a large shop. This pump runs very efficiently on compressed air. The unit is fantastic condition and has been recently tested. This type of setup cost over $12,000 new and is a great deal for $6,000. I have short video of the system running if you are interested. I am selling this pump because it was included in an equipment lot I recently purchased and my shop is currently too small to make good use of it.

Included:
- Two Post Ram/Lift System (RM552SC)
- 4 ¼ inch Pump with 12:1 Pump Ratio (Model 66243-C43, Serial #E0134)
- Air Motor 150 psi Air Pump (Model 650491-C43B, Serial #E0134-001)
- Follower Assembly (TP0412S51)
- 10 foot 1” Heavy Duty Output Hose
- Regulator/Oiler Assembly
- 55 Gallon Vertical Drum Lifter Bracket (Over $500 new)
- Operator’s Manual/Engineering Data

Reduced to $6000 or I would consider trade for the following items: QualityExposure Unit (40x60" or larger), M&R Style 20x30" aluminum pallets (need 12), M&R Style 20" squeegees (Need 10), M&R Style 21/22" flood bars, prefer winged (need 10), M&R Style 1" U-Clamps (Need up to 80).

Dreams2print · February 28th, 2018, 06:20 PM

hi i am interested can you send me a video of it working [email address]

RZRevo · March 1st, 2018, 09:05 AM

Quote:

Originally Posted by Dreams2print

hi i am interested can you send me a video of it working [email address]

I sent the video from my cell phone. Let me know if you did not receive it.
Thanks,
Steve

RZRevo · March 8th, 2018, 08:23 PM

Quote:

Originally Posted by RZRevo

ARO Ink Distribution Pump (for 55 Gallon Drums) $6,000

This 4 ¼ inch chop/check type piston pump was specifically configured to distribute screen printing ink to multiple ink stations for a large shop. This pump runs very efficiently on compressed air. The unit is fantastic condition and has been recently tested. This type of setup cost over $12,000 new and is a great deal for $6,000. I have short video of the system running if you are interested. I am selling this pump because it was included in an equipment lot I recently purchased and my shop is currently too small to make good use of it.

Included:
- Two Post Ram/Lift System (RM552SC)
- 4 ¼ inch Pump with 12:1 Pump Ratio (Model 66243-C43, Serial #E0134)
- Air Motor 150 psi Air Pump (Model 650491-C43B, Serial #E0134-001)
- Follower Assembly (TP0412S51)
- 10 foot 1” Heavy Duty Output Hose
- Regulator/Oiler Assembly
- 55 Gallon Vertical Drum Lifter Bracket (Over $500 new)
- Operator’s Manual/Engineering Data

$6500 or I would consider trade for the following items: QualityExposure Unit (40x60" or larger), M&R Style 20x30" aluminum pallets (need 12), M&R Style 20" squeegees (Need 10), M&R Style 21/22" flood bars, prefer winged (need 10), M&R Style 1" U-Clamps (Need up to 80).

bump