Can't Find a Pressure Fixture Anywhere

inkimprints

I recently purchased a Tajima TFHX-IIC1504 that was in non working condition. I was able to get it running and all heads and needles work properly minus Needle 2 on Head 2 is missing the pressure fixture.

I searched the internet high and low and cannot find this one particular piece and it's driving me crazy. I would the pressure fixture and the nut that would hold it on.

I was able to order a portion of the parts such as the spring and the lock shaft.

Luckily I a schematic online to show the parts and part number, the part is "Pressure Fixture" and part number is "FN0626020000"

If anybody has excess of these for their machine I would be happy to purchase one or two if possible, I like always having extra on hand.

It's part number 21 in the schematic here https://ibb.co/h7Z0k4F

I ordered part numbers 19 and 20 but if I can get the entire assembly in one that would ensure I can get my machine running at 100%.

thanks in advance!

dgeorge

Take the piece from the last needle and put it on needle 2, for a better look,until you get one
This piece holds, blocks the thread, during and after cutting.
I did tests and the machine runs, sews, just as well without it.
You can try, I did tests with a SWF machine.