COMPLETE AUTO PRESS PACKAGE (press, chiller, compressor)

haigdem

(updated notes and new video in action)

Hello,

We are planning to get an all electric press early next year so we would like to sell our current automatic along with all the necessary accessories making it a perfect way to get into automatic printing. The machine will be cleaned up if a buyer is found!

***THIS PACKAGE INCLUDES***

-12 Head/14 Station 1998 TUF Olympian Press which is capable of OVERSIZED printing if you invest in larger pallets and squeegees

-22 x 22 (estimated size) Flash Unit

-A rare 25 HP electric beast of an air compressor which is plumbed to a 120 Gallon tank with ANOTHER 10 HP motor attached to the tank giving a total of 35 Horsepower of massive CFMs! Can easily run two machines with this setup and the 25 HP compressor is rare, they don't make them that big anymore without being a screw type.

-Air chiller capable of handling roughly 55 CFMs which is plenty for the machine it's being sold with.

-All the electrical, plumbing, mounts, required to setup the air compressors in your shop. Meaning it will come with both MAG starters (mag starters are expensive!) and all the plumbing to minimize the amount of effort it will take to setup in your shop. Making it as plug-n-play as possible for you.

***NOTES ABOUT THE PACKAGE***

-The press is a 10 color press with 2 "Dummy" heads meant for permanent flash placement. So it has 12 heads but 2 of them aren't meant to print.

-We actually bought this press off this site about 2 years ago and now it's being sold here again!

-We fixed a bunch of little issues it had and now runs much smoother since we've owned it but it still does have a few little air leaks and is a noisy machine compared to brand new presses.

-We left a few of the control panels/plates (with the speed control knobs) on a few of the heads unscrewed after air leaks were repaired but there are no issues with that and we'll clean up the machine and screw those into place if a buyer is found.

-When we got the machine it had no rubber top on the pallets, just aluminum, but we've since added the rubber tops. We print a lot of ladies fitness apparel which is small and stretchy so we reduced the pallet width from 17 x 23 to 15 x 23 inches to make it easier to load smaller apparel. When we did that it loosened some of the rubber we originally applied to the pallets so some of the pallets can use new rubber or reapplication of glue.

-Despite the small air leaks and some loose pallet rubber the press works well and can handle just about any type of print project!

***PICTURES AND VIDEOS***

https://youtu.be/5RtQOwVGVKU

https://youtu.be/c618q9vFIkI

https://youtu.be/yB25FXi0S6E

Call 818-775-0700 from 8am - 5pm PST to inquire further. We are asking $18,000 O.B.O. and we'll entertain all serious offers!

Attached Thumbnails

       

haigdem

Original post updated with a new longer video of the machine in action as well as a note that the machine will be tidied up when a buyer is found.

Also, since it's currently our only automatic we will need to use it for a few short weeks after it's sold while we order a new press so we aren't out of an automatic for more than a few days.

All serious offers will be entertained!

haigdem

(BUMP)

I think my first video link was set to private and I wasn't sure if you guys could have viewed it, it should be viewable now.

This machine is still in daily use but I need to move this out by the end of January to make room for a new press. We will start taking bids, no matter what the amount, and we will just sell this package to the highest bidder in a few weeks. So if you are interested please PM me or Call the number listed in the original post. 818-458-5219

We can disassemble the press and load up the truck (we will have fork lifts available) but the buyer is responsible for figuring out the shipping company, or renting a truck and paying for transport. The last time we sold a machine on here was to a SoCal buyer and they rented a large U-Haul and it took about half a day to disassemble everything and load up the truck.

Start sending your bids, we need to secure a buyer soon!

haigdem

Hi guys, the press will be disassembled and compressors/chiller moved out in about 4 - 6 weeks regardless if we sell or not so we are willing to take just about any offer for everything. We're willing to sell things individually, if you only need another working chiller that's not problem.

All this equipment will stop being used towards end of January so we want to move it! If interested make any offer and we'll definitely consider it!

3eThreads

email me

haigdem

LOWERED PRICE

$5k for press and flash

or

$8k for press, flash, 2 air compressors, and air chiller

haigdem

Bump

eternalrites.ts

What's best u will take

haigdem

Thanks for showing interest. The price I last posted is already incredibly cheap so $5k for just the press and $8k for everything is as low as we can go. We do have somebody looking at the press in person next weekend so if you are truly interested give us a call.

Thank you

haigdem

Another video of the press doing a great job on a 4 color CMYK Process job!

https://www.youtube.com/watch?v=x7LGoXcnTZU