Complete Newman L2 Stretching System

danlilsade · May 18th, 2014, 04:05 PM

This is a "LIKE NEW" complete system for stretching 23" x 31" M3 Roller Frames, it will also do other sizes of M3 frames "as is", by contacting a Stretch Devices distributor MZX "wrench ends" can be picked up and it will stretch various sizes of MZX frames including 23" x 31".

These are all genuine Stretch Devices components including the Newman ST 1E 130 Nm screen tension meter. The tension meter is in it's original case with calibration glass. This lists for $465.00

The package includes: Manual MZX/M3 Magnesium Wrench, 12 Mesh Clips, 4 Hand spring tension clamps, torque wrench (not pictured), Newman Stretching Instruction Manual, L2 table and ST1 meter. The price is $2,750.00 for everything (crated), this package new would exceed $4,000.00.

If pieced out I will accept $2,400.00 for the L2 table with clips and clamps, $350.00 for ST1, $70.00 for the Wrench & Torque Wrench Combination. I will not sell the units individually up until after May 25th.

I accept MC, Visa, Discover and PayPal.

Below is a description of the L2 Stretcher from an online retailer's site. The list price is for the table only:

Mini Master L2 Screen Stretcher
List Price: $3,287.00

Description
The Mini Master L2 will stretch your Newman roller frame in all 4 directions simultaneously. Using the L2 Roller Master, you can tension frames, in outside dimensions (OD) as large as the MZX 23"x31" or M3 23"x31"-23"x33" with everyone laying flat every time. The Mini Master L2 model will save substantial time and energy in stretching frames with consistent tension from screen to screen, producing 3-times as many screens per hour than the manual method. More uniform screen tension, less physical effort, and less skill in stretching allow your screen making department to be more profitable while still maintaining production. The Mini Master stretching system operates with compressed air without any electrical hook-up.

danlilsade · June 21st, 2014, 05:17 PM

I traded the M3 "wrenches" for MZX, so the stretcher is now set up for MZX frames and M3 wrenches would need to be purchased separately. I will take $2k for the table, clips, spring clamps, torque wrench and tension meter. Every item is in like new condition. This is a super bargain if you are in the market to upgrade your stretching department.

danlilsade · June 25th, 2014, 09:47 AM

bump

danlilsade · July 8th, 2014, 01:08 PM

Price dropped package $1,800.00, back out tension meter $1,550.00 crated.

danlilsade · July 14th, 2014, 06:46 PM

Ready to sell this, $1,400.00 everything except the meter add $250.00 for it.

the bill · July 16th, 2014, 10:53 PM

hi bill

is the l2 still available? is it setup to stretch the m3 roller frames?

hoogie · July 18th, 2014, 06:59 AM

is this table still available?

danlilsade · July 20th, 2014, 05:45 PM

Yes still available and super clean. Yes it will stretch M3 frames, however the wrench ends would need to be cut slightly larger (any machine shop could this for not much money) or you could buy new M3 wrenches from Newman and be able to do both M3 and MZX frames. Call me at 803.466.8670 and we can work out a deal.

Thanks,
Bill Foust

Quote:

Originally Posted by the bill

hi bill

is the l2 still available? is it setup to stretch the m3 roller frames?

Droplet · March 15th, 2015, 10:20 AM

is this still available?