Do I need M&R tech ?

nameless clothing co. · January 7th, 2011, 07:02 PM

Hey I have a ? I picked up a used gauntlet revolver 6-8 great cond. I have re-assembled the press ,had my electrician re-connected electrical, have the reg.bar
I just want to know if there is any info on reg./set up level the press
or am I goin to have to pay M&R $90 hr.
located in so.cal
Thanks for any feedback
remain nameless......

srimonogramming · January 7th, 2011, 08:27 PM

I'm not completely certain on that press but I think when the printarms are disassembled you have to re-register the press when you install it again. Someone correct me if I'm wrong. Even if you have the correct tools to re-register the machine, if you've never done it or have the exact directions to a tee then I would not attempt doing it. I've seen it done half a dozen times and there is no way I could do with what little I know about the process. Once you've done it a few times it really isn't that difficult, but you need the experience and know how to do it correctly. You don't have to pay an m&r tech to do it, there are plenty of qualified people out there that can register the press and then you can do the rest on your own if you know how to parallel an auto. I'd contact your local screen print supplier and see if they have any contacts for technicians and then I'd post on here whether or not that particular technician is known and is capable. Believe it or not, there are some private techs out there that are very sloppy and they aren't detail oriented enough to perform something as important as registering a press or even installing a press correctly.

iinc · January 7th, 2011, 08:38 PM

If the registration bearings are mounted to the print arms and they were removed and reattached in the move you need a tech. A good tech should not take more than a couple hours to reg and level and set the off contact. Money well spent. Try to schedule the closest tech even if youu have to wait a few extra days.

Travis Jensen · January 7th, 2011, 10:12 PM

Registering press takes some time. If you need help and info call me up and I can let you know how to get your préss set up without paying the crazy tech fee. 702 427-1993

Darrel Dunlop · January 8th, 2011, 01:26 AM

You need a micrometer and the brace that holds the micrometer to register the machine. People thinks it is hard but is really not. Travis is right. Don't pay the tech to do this if you can do it yourself, you may spend a little longer the first time but once you do you can maintain your reg. yourself. Off Contact is very easy to set. Balance the machine is easy with 2 Long levels. Hummmm Tech..... 2 Levels, micrometer, brace and you already have the z-bar for reg...... your ready to do it yourself money not well spent on $90 dollars an hour from the time they move off the toilet take a super expensive lunch break and hotels and rental car.

nameless clothing co. · January 8th, 2011, 02:43 PM

Thanks Guys For The Info! Im Def. Gonna Contact U Travis And Check All Poss. Ave. Thanks Again For The Input I Will Post Back On What Way I Go

homersapien · January 8th, 2011, 09:07 PM

Be careful if you use a tech. I have not used one personally but I have had to clean up the messes one left behind. Examples:

He would take several hours to register the press. If done properly it should only take 30 minutes. (I got mine within a couple thousandths in the time.)

He would not level the pallets with mush precision, then he would sell you the heavier chopper cylinders to compensate for the poor geometry.

Also, make sure your pallets are all in good condition. If they are not flat, or if they need new rubber, fix that problem before you pay a tech.

There are several other scams to watch out for....but just ask why on everything he tries to fix.

nameless clothing co. · January 8th, 2011, 09:32 PM

THANKS HOMER
I do know the press is in great cond. pallets etc. i actually have had a m&r tech stop by on his own to size up my shop before the app. and he also agreed it is in great cond. and was well maintained ,so knowing that , thats is why i feel i should at least have the option to set up press w/or without a m&r tech
any other tips i thank u in advance hope u have a Great year
remain nameless...
namelssclothing.com

nameless clothing co. · January 10th, 2011, 11:40 AM

Gonna check out some options 2 day Thanks 2 everyone who replied to my ?