October 20th, 2010, 02:27 PM
|
#2 (permalink)
|
Junior Member
- Join Date:
- Mar 2008
- Location:
- So. Cal
- Posts:
- 16
- Liked:
- 0 times
|
Re: Epson 4000 film problem
yes, first thing is first put it on sheet setting so that the machine will display ready. Next hit the menu button printer set up hit the right arrow, scroll down and select check paper size hit right arrow change to OFF* hit the left arrow and look for check paper sckew hit the right arrow and change to OFF* hit the left arrow until the machine reads ready again load you roll film in the machine and your good to go. If you have it in no cut mode then you may want to also turn OFF* the print Line in the Printer Setup.
www.parmelesupply.com
|
|
|