June 26th, 2023, 04:07 PM
|
#1 (permalink)
|
|
Junior Member
- Join Date:
- Oct 2014
- Posts:
- 0
- Liked:
- 0 times
|
Epson F2100 Shurz Pretreat 3, Adelco Dryer etc
State/Province:
Outside the U.S./Canada
City:
Reno, Nevada
We switched off of DTG and are getting rid of our equipment.
Obviously I would like to sell everything as a set, but am realistic and will split it up.
Bundle price for everything: $10,000. The dryer alone is probably worth that, I just want to get this stuff out of my way. Individual pricing below.
Two Epson F2100's. Both were taken out of production about a week ago. The lines were completely flushed with cleaning fluid and put in storage mode. These were always under warranty and maintained by Epson. I believe the warrantees are up on these now though.
Printer 1: $3000. It will come with a laptop with Kothari Rip on it, and the printer stand with storage. This one had just started giving me a platen movement error. I would just push the platen in a little the pull back out and it would work. Last time this happened on our other printer the tech just needed to tighten the belt that moves the platen.
Printer 2: $3000. This one will come with the Dongle for Kothari Rip, but I need to keep the computer the software is installed on. It can be downloaded from the Kothari site. This printer is the one on the red table in the picture, but is on a rolling table now and will ship on the rolling table.
Both printers will come with a standard platen, and a 16"x20" platen. I have a tucklock 16x20 platen, and an epson 16x20 platen. First come first choice on which you would like. I'll also split whatever supply of ink and DTF powder glue between the two printers.
Shurz pretreat maker 3: $500. Everything works just fine on it. I would probably pick up some new nozzles for it. They are $8.00 each I believe and you need 4. The nozzels on it work, but they are a bit corroded looking from being left in cleaning fluid.
Adelco 4 drawer dryer: $5000. This thing works great. Kept up with running the two printers, and keeps the heat contained to itself as long as you don't leave the drawers open. It's 3phs, and pretty large. We cut a hole in a wall and had it sticking halfway through. It does not fit through a standard door.
Miscellaneous platens: $500
There is:
Tucklock dual sleeve platen
Hinged single sleeve platen
Tucklock Youth Platen. 10x14 maybe. I can't remember.
The Captain hat champ thing. Full system for printing fronts and bills of hats. I have it customized and set up for mask printing at the moment but everything is there for printing hats.
Local pickup preferred but I'll palletize and ship if needed.
|
|
|
|
