September 9th, 2008, 09:21 PM
|
#4 (permalink)
|
Junior Member
- Join Date:
- May 2008
- Posts:
- 16
- Liked:
- 0 times
|
Re: Error of Tajima
When you first turn on a D model tajima (ie TME-DC912), the machine shows the version of the firmware in the EPROMS.The D says it is the IDM card with version 2.03 It should switch to the letter N and show the version of the second eprom located on the IMM PCB . You may have a faulty IDM card but you should try reconnecting the cables inside the controller. You can also turn on maintenance mode dip switch, this sometimes unlocks the machine
|
|
|