February 10th, 2023, 01:12 PM
|
#1 (permalink)
|
|
Junior Member
- Join Date:
- May 2011
- Posts:
- 13
- Liked:
- 0 times
|
Full DTG Setup with Backups Brother 381s, HIX dryer, Hotronix Presses, Vipers
State/Province:
Michigan
City:
Ann Arbor
We are selling our full DTG department. Available in approximately 2 weeks. We are still printing a few days a week with them. Located in SE Michigan.
GT-3 #2 (machine on the left in the tent)
Serial # D3997085
Prints 60,956 (we're still printing on them so these will change)
W1 - Replaced 8/22
W2 - Replaced 8/22
W3 - Replaced 7/21
W4 - Replaced 10/21
K (Black) - Replaced 8/22
Y (Yellow) - Replaced
M (Red) - Replaced
C (Blue) - Likely original Print Head
GT-3 #4 (machine on the right in the tent)
Serial # J4913970
Prints 56,880 (we're still printing on them so these will change)
W1 - Replaced
W2 - Replaced
W3 - Replaced
W4 - Replaced
K (Black) - Replaced
Y (Yellow) - Replaced
M (Red) - Likely original Print Head
C (Blue) - Likely original Print Head
Also have 3 unopened print heads. Amount of inks and pretreat at time of sale is up in the air, but we will have some extra.
The extra Viper should work well and need minimal configuration to use again. The extra Hotronix heat press keypad doesn't work properly and doesn't report the temperature - needs a couple parts replaced.
HIX dryer works great.
Looking to sell as a whole for only $11,000.
|
|
|
|
