August 23rd, 2011, 06:42 PM
|
#2 (permalink)
|
Junior Member
- Join Date:
- Aug 2011
- Posts:
- 2
- Liked:
- 0 times
|
Re: Help with EMC6
You might try to reconfigure the mach. by holding the alt,up and down buttons at the same time when you first start up then scroll to emc6 hit enter then scroll to the unit number you have chosen, you should not have any designs loaded at this point,but the machine shouldn't want to sew with out first keying in a design, Hope that helps you out.
Ktembroidery
|
|
|