HELP! Need TAJIMA X-Y card

dgeorge

pay attention

some DU10 drivers are special made for TME-H OR TMEG models
you must tell exactly your machine model

dgeorge

in 18 years i never changed both X&Y drivers at the same time(only X or Y)
if LED s drivers are off maybe one phase is missing ( check the fuses)
anyway if you will change the drivers ,you must check frame drive system(belts,pulley,shafts,bearings etc.)
if mechanical is something wrong you will burn the driver again.

designbyczar

Hi, this is Czar. I have a DU10 Card if you have interest on it may you contact me at (210) 538 9309 or email me at Thanks