HELP! Need TAJIMA X-Y card

faisaltef

I Need TAJIMA MACHINE X-Y CARD. SOMEONE PLEASE HELP ME FOR WHERE I COULD BUY THIS.

dgeorge

what model is your machine?
what model is the driver?
i have only DU6 driver for TME,TMEF

Sulp

Call Hirsch. (800) 394-4426. But those cards are not cheap. Expect a few thosand dollars for a replacement XY card. Did you burn something up that you can see or smell? The reason I ask is because I just had a Tajima S-card burn up on me and they wanted $1000 for a new card and $650 to fix it. I have no electrical experience whatsoever but I could see what part burnt up on the board. I removed it and did about an hours worth of re-search and found out what it was. It turned out to be a Thyristor (which I had never heard of). I called around and eventually found an electronics company that had something very similar. He sent me 6 of them for $15 and I bought a $20 soldering iron. I soldered the new part on the board in about 10 minutes and the machine is running beautifully now...Total cost: $35 and about 2 hours in time.

dgeorge

all the time the problem is :
the part(s) cost is 1$ and 999$ because the tech. know what part(s) to change.
you can try also www.plrelectronics.com if you want to fix the card.
but again.what model is your driver?

faisaltef

my machine model is TMFD-920.
this is DU10 Driver.
help me.

dgeorge

try www.plrelectronics.com to buy or to fix your driver

ldiaz

I had the same problem, but I was fortunate enough to have some connections in Mexico and ended up repairing the card instead of buying a new one.

dgeorge

time to time i fixed DU10 changed V MOS power module MP 6101
but not all the time must be the same.
you need some experience and tools to change this circuit.
pay attention is four layers board !

faisaltef

i want a perfect address where from i buy it. i want its price.
please help.

dgeorge

try
www.plrelectronics.com
www.hirschinternational.com
www.emb-hiroki.com
or another Tajima dealer(look at www.tajima.com for sales network)