May 2nd, 2010, 03:56 PM
|
#2 (permalink)
|
Junior Member
- Join Date:
- Feb 2010
- Location:
- Hinesville, GA
- Posts:
- 10
- Liked:
- 0 times
|
Re: help printing on wind breakers
First of all to print on nylon windbreakers you have to have a jacket hold down table. If you don't have that, good luck! Several Inks can be used, my best experiences always came from Internation Coatings, 2 part system. Multi-color prints require flashing the jacket first, then printing first color, flash, print, flash and so on till it is done. Not an easy product for amatuers.
|
|
|