Hoopmaster Placement?

sydney.fedesna · July 8th, 2012, 05:31 PM

Hi all,

Is it just me, or does anyone else think that the recommending settings for using the Hoopmaster places designs too low and too far to the outside? I usually end up moving the design up and over 1/2 inch on the machine, but I guess I could just go up and over one setting on the Hoopmaster as well. Just wanted to get some other thoughts...

Also, I am getting ready to do a large number of Ladies XS 100% poly polos and want to make sure I get the logo placement just right. Does anyone have any measurement recommendations as to where to place the logo (or what settings to use on Hoopmaster)? I really need these to look perfect!

Thanks as always for your help!

Sydney

minimalist · July 9th, 2012, 12:14 PM

Here ya go:

http://www.barudanamerica.com/assets.../KBSEAPolo.pdf

sydney.fedesna · July 9th, 2012, 03:07 PM

Thank you - I have a sheet or two similar to this, but I still can't find anything that addresses a Ladies XS - everything starts with a Small. I guess maybe I'll go 1/4 to 1/2" up and closer to center for the XS and see how that works. I have a pretty good eye for where the logo should go, but then I put it on the Hoopmaster and it is WAY off from where the center should be IMO.