DigitSmith

How to convert 220v to 120v in a tajima

 
 
Classified Ad Tools Search this Classified Ad
Old December 14th, 2011, 11:54 PM   #1 (permalink)
fedecorona1 fedecorona1 is offline
Member
Join Date:
Oct 2009
Posts:
54
Liked:
0 times
Default How to convert 220v to 120v in a tajima

State/Province: Texas
City: SAN ANTONIO
Hello everybody, i have a tajima tmfxcii1206 and its says 240/120v, how can i move from one to the other, its there any switch or something?

Thanks in advance for your comments
Send a private message to fedecorona1 Contact
Old December 15th, 2011, 01:20 AM   #2 (permalink)
yetdy yetdy is offline
Junior Member
Join Date:
Oct 2011
Posts:
16
Liked:
0 times
Default Re: How to convert 220v to 120v in a tajima

I guess you just need to plug it in to find out. The machine will not be damaged if you plug a 240 to a 120v socket as long as it is not turned on for more than a minute. However, plugging a 120v to a 240v socket will destroy the machine. Here, we plug our embroidery machine to an AVR (automatic voltage regulator) just to be on the safe side. There are 10kva to 50kva ones for big machines.
Send a private message to yetdy Contact
Old December 19th, 2011, 08:18 AM   #3 (permalink)
Flint54 Flint54 is offline
Senior Member
Join Date:
Oct 2009
Posts:
152
Liked:
11 times
Default Re: How to convert 220v to 120v in a tajima

The voltage that the machine runs on is determined upon how the power input is wired up into the power supply of the machine. Unless you have a 220 plug on the machine I would think that the machine would be setup for 120. Unless you know exactly what you are doing or looking for contact a technician for a proper determination.
Send a private message to Flint54 Contact
Old December 19th, 2011, 09:12 AM   #4 (permalink)
dgeorge dgeorge is offline
Senior Member
Join Date:
Apr 2010
Posts:
261
Liked:
19 times
Default Re: How to convert 220v to 120v in a tajima

take off the back cover of power box.
you will see one free connector.
its an Y cable from CN-3 to CN-2
if you run at 120V you must plug in S-CN2 120v connector.220V connector will be free.
if you run at 220V you must plug in S-CN2 220V connector .120V connector will be free.
its an label on each connector.
you have this information in machine book.if you don t have i can sent to you

Last edited by dgeorge; December 20th, 2011 at 05:02 AM.
Send a private message to dgeorge Contact
Old December 20th, 2011, 07:18 AM   #5 (permalink)
dgeorge dgeorge is offline
Senior Member
Join Date:
Apr 2010
Posts:
261
Liked:
19 times
Default Re: How to convert 220v to 120v in a tajima

220v to 120v
Attached Thumbnails
How to convert 220v to 120v in a tajima-1-004.jpg  
Send a private message to dgeorge Contact
 

Classified Ad Tools Search this Classified Ad
Search this Classified Ad:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tajima & Barudan 8 Machines For Sale printit Old Embroidery Ads 2 January 16th, 2011 11:55 AM
6 tajima machines & threads winding machines and 100,000 spools of thread printit Old Embroidery Ads 5 April 1st, 2010 09:54 PM
Tons Of Embroidery Hoops - Tajima & Happy Astro416 Old Embroidery Ads 2 March 18th, 2010 05:28 PM
Tajima DG/ML by PULSE Digitizing Software - Aritist Version 2008 dan@5stardeal.com Old Embroidery Ads 0 July 27th, 2009 05:08 PM
Wilcom Vs. Pulse Tajima synergy Embroidery and Digitizing 4 April 27th, 2009 11:02 PM

All times are GMT -4. The time now is 09:47 PM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.