DigitSmith

Looking for something to help re-mesh screens

 
 
Classified Ad Tools Search this Classified Ad
Old July 14th, 2011, 08:38 AM   #1 (permalink)
portersprints portersprints is offline
Member
Join Date:
Jun 2008
Posts:
46
Liked:
0 times
Default Looking for something to help re-mesh screens

I am looking for something that will help me re-mesh screens.
I use a lot of 20x24 aluminum screens if that helps.
Email: [email address]

Thanks
Chance
Send a private message to portersprints Contact
Old July 14th, 2011, 08:43 AM   #2 (permalink)
tonypep tonypep is offline
Senior Member
Join Date:
Sep 2010
Posts:
165
Liked:
10 times
Default Re: Looking for something to help re-mesh screens

There are several companies that mfgr screen stretching equipment. Harlacher on the more expensive side M&R more affordable. Do the research and make sure you get the equipment that suits your needs. I'm actually in the process of building my own. Also occaisonally used ones hit the market. Check them out in person if you can. Often they are so contaminated with glue they are unusable.
Send a private message to tonypep Contact
Old July 14th, 2011, 11:41 AM   #3 (permalink)
printit printit is offline
Senior Member
Join Date:
Sep 2008
Posts:
540
Liked:
0 times
Cool Re: Looking for something to help re-mesh screens

WE have a manual unit used for 4 months that actually works well great for small volume it takes aprox 7-8 minutes to strech a screen super tight like 19-23 newtons depending on mesh. my customer needed to do more 23x31,s and double up so this unit did not do that they bought a tuff products strecher which was the original inexspensive unit then M&R knocked it off almost exactly they use to look like twins

but the unit we have has hand cranks knobs 2 on each side just pop the screen in and put mesh over it and put the rhard rubber inserts in make sure they are all even and crank one side alittle then the other etc etc and applie the glue and activator a for a instant adhesion

$400
__________________
ldxn5043@gmail.com
Send a private message to printit Contact
 



Similar Threads
Thread Thread Starter Forum Replies Last Post
Used Aluminum Screens 110 Mesh TEAMGRAPHIX Old Screen Printing Ads 9 July 3rd, 2010 07:11 PM
What mesh should be used (Textile Printers) sharefilters Screen Printing 0 March 30th, 2010 11:41 AM
30 Wood Screens - mostly 110 mesh count- Like New!! bmk526 Old Screen Printing Ads 0 March 26th, 2007 11:59 PM

All times are GMT -4. The time now is 07:55 AM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.