April 9th, 2018, 12:52 PM
|
#1 (permalink)
|
|
Junior Member
- Join Date:
- Jul 2017
- Posts:
- 0
- Liked:
- 0 times
|
M&R Manual Squeegee and Floodbar Clamps - Gauntlet/Challenger
State/Province:
Outside the U.S./Canada
City:
Houston, TX
I have 25 sets of U-clamps for M&R presses.
$20 per set plus shipping.
I have a few with knobs that are intact, more with knobs that are broken and most with no knob. The picture is of a pair with no knob... they work fine in all 3 configurations.
These are $26/ea from Action Engineering and no telling what M&R wants for them.
NOTE: These are only for M&R Gauntlet or Challenger Presses. I've had several people contact me and ask about using them on other brands/types of equipment. I do not know and cannot help you with that. I am unable to measure them in detail or photograph them to see if you can hack them to work with something else. I only can tell you that they will work fine with an M&R Gauntlet or Challenger press. Because these are hard to find and out of production I will not sell them to anyone who is not using them on an M&R Press. I'm not going to make it any harder to run one of those good old presses than it has to be. Thank you for your understanding.
Last edited by Brian Greul; September 1st, 2018 at 02:34 AM.
|
|
|
|
