Melco
Melco EP1 Single Head, Single Needle- 1995, with many extras and all the supplies will be sent. Instruction Manuals are Included.
Comes with EDSlll Software. All the Hoops and the Hardware that came with the machine is included, Located in Ohio, Picture Available.... $2400.
Includes: 2) 5x9 wooden hoops, 2 hoop it all frames for caps or flat stock, 6 d hoops,key board,cpu,softwear edslll,no monitor
too expensive to ship all the manuals, all the supplies and tools that came with the machine.
Melco EMC6 MTL Single Head,6 Needle- 1993, Trimmer, and Large Bobbin Case. Sewing field is approx. 11.5” x 16.5”.
This is a well maintained machine currently used in operations. Includes many hoops. It was just serviced.
Located in Washington State, Picture Available ....$3500.
Melco EMC10T Single Head, 10 Needle- 1995, Floppy Disc Drive Option, Trimmer, Tools Free Hat Driver and Hoops. Manual Included.
Located in western Massachusetts. If sold locally, no crating needed, buyer picks up.... $5300. If crating is needed for shipping.... $5500.
Hoops: 2 – 9x13
2 – 11x16
2 – 6” round
1 – 5” round
Cap driver, cap hoop clamp and 2 cap hoops
Boot disk for floppy drive and a backup cd with boot disc files
Melco EMT10T Single Head, 10 Needle- 2001, with Cart, nice Machine, Excellent Condition, Ethernet, Systemax Computer and 17" Monitor
EDSIV Software Hoops Thread and All Designs. Pictures Available, Located in Indiana....$7600.
Melco EMT10T Single Head, 10 Needle- 1999, It has the EDSIII software, Manuals, Set of 6 Fast frames, 12 Standard hoops of Various Sizes. Several Boxes of Pre Wound Bobbins and Various Backings and Stableizers. Located in New Hampshire, Pictures Available.
The machine was factory serviced about a year ago and has not been used since then.... $7600.
Melco EMT 10T Single Head 10 Needle- 2001, with original EDS IV Extreme Software & Computer, Upgraded last year to Design Shop Pro
which includes Digitizing Software/Manual, and 75 additional Alphabets. Located in Michigan, has only been used part-time. In great condition.
Well Maintained, with last professional maintainance done just one year ago by Tristate Services, Pictures Available.... $14,500.
Includes: Threads, Bobbins Needles, Scissors, Backings, Wall Unit for the Backing Spools.
Hoops:
16 x 11
14 x 11
2-8" round
2-7" round
2-5.5" round
2-4.3" round
2-3.5" round
All-In-One hooper
Pentium Computer & 17" monitor
Hub, Ethernet, Port, Cables
Hat Frames
Instructional Video
Dakota Collectibles: Over 16,000 Designs
Design Shop Pro Software
2) Melco Amaya Single Head , 16 Needle- 1-Dongle Setup which Includes Design Shop, also comes w/misc hoops & misc threads
backing and much more. Includes all of 2005 Dakota Collectable Designs. Located in Rhode Island, Picture Available
2-years old.... $16,000.00 Selling the 2 machines together. These embroidery machines work off a dongle.
You can add as many machines as you would like.
Melco 4 Head, 10 Needle- Tubular with Trimmers, 2002, Low running hours logged. Some thread and accessories. No cap driver etc.
Some backing and probably 36 bobbins of threads. Located in North Carolina, Pictures Available.... $14,000.
Melco EMC-10/4T-CE 4 Head, 10 Needle- 1996, with built in Disk Reader, Includes all Hoops for Flats and Caps.
Pictures Available, Located in New Hampshire.... $9,000. or $BO
Melco EMT-10/6T-6 Head, 10 Needle- 2000, Comes with Freestanding Computer System, Hoops, Cap Drivers, Located in Georgia....$18,500.
Tajima
2) Tajima's Single Head, 12 Needle- TMEX-C1201, 1998, Includes: Hoops, Like New, Located in Kansas, Pictures Available....$7600. each
Tajima Single Head, 12 Needle- TMEX-C1201, 1999 complete with hoops and hat frames numerous extra threads of various colors.
Pulse Software updated 2004 and a complete Dakota Collectable 2004. Used more as a hobby than production machine, so the operation
of the machine has been limited. Everything is in good working order, Located in Michigan .... $11,000.00
Tajima TMEX C1501 Single Head, 15 Needle- 1999, Will sell with or without software - Pulse Signature 2000 - Illustrator.
Hoops:
3 - 18 cm tubular plastic
2 - 15 cm tubular plastic
1 - 20 x 15 tubular plastic
2 - double height wooden for jacket backs
1 - 9 cm tubular plastic
1 - 24 x 24 plastic tubular
2 - 413 x 467
1 - 7" circular wooden double height
3 - fast frames different sizes
1 - large 26" x 18" metal frame
Hat frame for machine
2 hat hoops
1 hat hooping station
Regular hooping station for flat goods. Some threads, topping and stabilizing materials.
No Pictures Available, No way to crate or pack up-- This machine would do best to be Sold Locally- to someone that could go and see it
pack it up and transport themselves. Located in Central Mass....With Software $10,500. Without Software $10,200.
Tajima 1506 TFHX, 6 Head, 15 Needle and Tajima C1501, Single Head, 15 Needle -can be sold individually or as a package
Both machines are 2004, Rarely Used and Very Well Maintained to Include Environmental Air/Heat Year-Round
Pictures Available, Located in Calif.....Package Price $45,000.
Tajima C1501, Single Head, 15 Needle- Basic machine, no hoops, frames or software....$8000.
Tajima 1506 TFHX, 6 head, 15 Needle- Cap Frame kit = 12 cap frames, 3 sashes, 1 gauge, Software Wilcom ES25 ID Lettering
Editing, Scanning, and Digitizing, 12 each Hoops: 12 cm, 15 cm, 18 cm, 329 x 335 mm, Large Jacket Back...$40,000.
Tajma TMEX C1201, 1 Head, 12 Needle- 1997, Hat Attachments and Hoops.... $7000.
Tajima TMFXII C1202, 2 Head, 12 Needle- 1997, Hat Attachments and Hoops.... $16,000.
Tajima TMFXII C1204, 4 Head, 12 Needle- 1998, Hat Attachments and Hoops.... $21,000.
or Package Deal All Three Machines for $41,000. Located in NJ, Pictures Available. $Seller Taking Offers
ZSK
ZSK 2 Head, 11 Needle- 1998, Model J-02-11, Auto Trimmers, 2 plastic size 12 square frames, 4 wood circle frames size 15, 4 wood Border Frames 17" X 16.5" Includes: Manual and Computer(no digitizing software), Includes: 3 15 cm hoops (Wood) and 2 12cm hoops (Plastic) 2 Wide field full back hoops (Wood)
Can be seen and running. Just Serviced, Located in Wisconsin, Picture Available....$12,500.
ZSK 6 Head, 11 Needle- 1998, Model J-06-11, Auto Trimmers, 14 plastic size 12 square frames, 10 wood circle frames size 15
10 wood Border Frames 15.5” X 11.5”, Includes: Manual and Computer (no digitizing software), Can be seen and running.
Just Serviced, Located in Wisconsin, Picture Available....$20,000.
ZSK – 220/20/240- 20 Head, 7 Needle- 1993, ZSK Multi-Sticktronic 220 E, 240 mm between embroidery head, Maximum Embroidery Field
240 x 300/500/700/900 mm, Border Frame 4800 x 300/500/700/900 mm, Embroidery Speed/min up to 750 stitches, Automatic Thread Trimmers
Includes-Hoops in many sizes with rapid clamping system, MSCM control unit (Disk reader), Includes-Software- Reads most formats
Pictures Available, Located in Oklahoma....$10,500.
Ask About : Our Refurbished Embroidery Machines. They come with 90 days warranty on motors and boards.
Let us know what brand you are looking for and we will see if one is available.
Miscellaneous Embroidery Supplies
Version 9 of Hirsch DG/ML Artist Plus Digitizing System- A fully loaded editing and digitizing package for the new embroiderer or the advanced digitizer. Runs under Windows XP. Great for lettering, editing existing designs - and merging designs, and creating brand new full featured designs. Capable of all stitch effects...running, satin, complex fill, carved pattern stitches, etc. Lets you import artwork in many formats including vector.
For a small fee this version is upgradeable to the most current.(Training will be provided with the upgrade) Located in N. Carolina.
This package is available from Hirsch for approx $11,000.00 ....$6000.
PulseDGML Advantage Software Digitizing and Lettering Program, Located in Penn.... $1500.
P&F Frame Press- Automatic Hooper- All Barudan Frame Heads. 290x330, 15cm,12cm, 9 cm.?? The left chest size(s) are awesome.
The P&F Frame Press is tops for quick and accurate alignment. Rejects are greatly reduced, and you will see an immediate increase in productivity. Located in Vermont, Pictures Available..... $2300.00
The customer can find additional information at
www.pfequipment.com -there is a great video to watch.
Includes: 290x300 bridge head, with base and second base for jacket backs, table top extension. OEM
15 cm blue hoop, with base. OEM (2 additional bases are aftermarket bases, different sizes)
12cm blue with aluminum base cylinder arm OEM.
12 cm white, face plate only. This uses metal portion from 15 head. Has aftermarket base.
Wrench.
Aftermarket parts were engineered and fabricated by a local cnc company that makes heart catheters
and other extremely sophisticated medical items.
Most aftermarket parts are made from thick Lexan and aluminum.
Unit weighs about 200 lbs.without crating. Crating is extra.
More of our April Embroidery Equipment
