DigitSmith

MS-2: Single Color Screen Printing Machine for Cups

Reply
 
Thread Tools Search this Thread
Old August 12th, 2009, 01:57 AM   #1 (permalink)
azarsayan azarsayan is offline
Junior Member
Join Date:
Aug 2009
Posts:
5
Liked:
0 times
Default MS-2: Single Color Screen Printing Machine for Cups

General Features
Maximum machine speed: 4500 pcs/hour
Maximum diameter of the cup: 160 cm

Machine dimensions
Height: 170cm
Length: 140cm
Width: 98cm

Special Specification
The capability of the screen movement with the from of ARC for conical print and linear For cylindrical print, low defect because of its mechanical foundation, harmonic movement of the screen and Squeegee.

The specifications of MS Series Machines
Three times faster than similar screen printing machines

A typical silk printing machine is always performing the following cycle:
Feeding
Printing
Ejecting

However, in MS series due to the existence of Index, all the three steps are done simultaneously. Therefore, eliminating the time spent for feeding and ejecting results in noticeable speed increase of the machine. As it is obvious in the video, the operator operates the machine very easily.

- One MS series machine equals 9 typical machines with the same productivity, and one fifth of personnel.

- These machines have treatment station and some hot air dryer stations, each of which is completely separate sets (machines) in similar machines. Noticing the machine speed variation, to getting an equal product there must be three treatments, three print machines, and three dryer conveyors. Treatment task in this machine occurs monotonously, due to the rotation of the part in the flame. This condition is also similar for the dryer. Also the operation of the machines and transfer of the parts from a machine to another requires six or seven workmen, which is done by only two operators in MS machines.

Very High Print Quality
The high and unique print quality of MS series machines are results of the structure of the machines.

1. Without considering the variables such as ink viscosity, air pressure, heat, cold environment, the pressure, and etc, the movement of the cliché is constant and fix; that’s because there is a cam with electromotor power for the movement of the cliché.

2. The high speed of the machine, allows the use of small hole net, and also using halftones of 80 dpi resolutions, without being worried about draining.

3. When you want to roll a conical part on a horizontal line, you see that the narrow part drags and the thick part spins. The same occurs while printing cups and other conical shapes and causes a shadow below and above the part. This problem has been solved in MS Series Machines.

4. If you put a digital scale under the SQG, you will find out that pressure of SQG increases and decreases about a gram without any interference.

More unlikely ruining and breakdown

Necessary time for designing a medical system is much more than pneumatic machines, but the breakdown possibility in a mechanical system which is designed and implemented, is very low. Therefore, instead of pneumatic machines, mechanical machines are used in MS machines designs.


MS models has been designed and manufactured in Azar Sayan Co. and there exists no similar ones anywhere.
__________________
Azar Sayan Machine Co., manufacturer of cup printing machine - Cup Printer. We manufacture very capable and inexpensive cup printing machine with very high quality and speed for printing on plastic cups, buckets, pails, and tubes.

Visit our website for products and their videos: http://azarsayan.com
Send a private message to azarsayan ContactReply & Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Happy Voyager HCS-1201 Single Head Embroidery Machine missdesik Old Embroidery Ads 4 December 17th, 2009 07:50 PM
9 Needle, Single Head Brother Machine - Priced to Move embroiderize Old Embroidery Ads 7 July 28th, 2009 01:22 AM
Zsk Embroidery Machine & All Other Textile Machinery Dealer In South Korea. nishaw Old Embroidery Ads 1 April 24th, 2009 03:39 AM
looking for used embroidery machine dealer leo cheung Old Embroidery Ads 0 June 15th, 2006 03:58 AM

All times are GMT -4. The time now is 11:11 PM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.