MultiCam CNC For Sale

terrymcv

http://youtu.be/cdgcCi7QJdQ
Video


Have photos





MultiCam CNC For Sale

Electronics, controller, drives updated to late model MultiCam Fresh rebuild on blower. (Table vacuum - motor less than 10 hrs since
rebuild)
Six tool changer
Extra tools, collets, etc.
Dust collector
SpeedAire Compressor
Extra tool holders, bits, collets, etc.
Updated Software with Dongle included
Free loading
Table size is 55 " X 105 "
Located CA
$10,000
Have video
Come and see it work
Located; Mira Loma, CA 91752

.Z Stroke
. Cont:rol ler Output Resolution
. Repeatabtlrty
. Ve-locity Range



SPECIFICATIONS

52 in x 106 in x 4 in
6 in
.00015 in
+!- .002 in
.,inches per minute-1000 inches per minute

Construction The system is rack drive on both the X and Y
axis. The Z axis is lead screw driven. The base frame is made from steel tubing in our fabrication fac1lrty. The table base is precision cut aluminum with an extruded tubular T slot top. The Gantry is a precision engineered extrusion which is fully machined to guarantee the perpendicular1y of the tool and straightness of cut, and then filled with a composite which significantly stiffens the system and reduces vibration. The rac fits in a machined recess that allows chips to fall away.

Spindle




Work Surface



7 HP High Frequency 18.000 RPM with automatic start when files are output.
Analog dial to control spindle RPM is provided. The spindle operation is integrated into the control system to have automatic starting and stopping with the job. An analog control is on the operator interface allowing on the fly speed control.

T slot table vac table with Sintra top milled to exact flatness on the
machine. Clamps and T slat nuts are provided. .


Controller Mover M2200 motion controller
communicates to the computer via an RS 232 serial interface. This is an Intel 1960 rise based processor with DSP technology (80 khz) output The Multicam 30 controller has the fallowing features .
. Keypad Interface
. Pause button
. Feedrate override
. Spindle speed control
. 19,200 Kbaud serial communications
. Built in self test
. Proximity restart
. Dry Run
. Two speed Plunge
. Go home button
. High resolution at high speed
. Mode change
. Auto surfacing
. Tool Change command

Software The system comes standard with an
HPGL interpreter built into the motion controller. Programs such as CASmate, Signlab, Flexisign, Enroute, ALPHACam and many more contain drivers to output files directly to the machine.

DNC Software - Allows the operator of the machine ta access files on a remote computer. Files of unlimited length can be retrieved.


Standard


Vacuum Pickup Head with Pressure Foot Assembly All system schematics Tool box with wrenches . grease gun, serial cable, clamps, and extra fuses .





Multicam 4x8 CNC Router Quote
db Tc:chnologies

Terry McVittie
PM Distributing Co/Equipment Exchange
PH: 813-949-7397
PH: 813-398-5141

www.equipment-exchange.net

terrymcv

Sold