Mutoh 1638WX Dye Sub Printers For Sale

Glover

I have three Mutoh 1638WX's for sale. Two are in working order and the the third printer could be used as a parts printer or be brought back with new heads. All three are dual head machines and they all have post heaters and take up reels.

Printer 1: Purchased in 2017, this printer is in good working order. Both heads are printing and the nozzle check shows one of the yellow channels not firing. I believe this to be a damper issue (30.00 -50.00 part) as this will print 100% once a little charge has been performed. Other than that, it really has been a great printer. It has been kept in a climate / humidity controlled environment. It comes with the ink refill chip reset already programmed as well as the OEM take-up reel and aftermarket Nite MegaHeat post heater. This heater is one of the best, if not the best on the market.

Printer 2: Purchased new in 2017, this printer has been great as well. Nozzle config shows one head not performing optimally but the other head is 100% (new OEM Mutoh head replaced by Axiom). Head flush may bring the head back as it is printing just a little but I would go ahead and change it out. Could be used as a single head print machine until the second head is repaired. This machine comes with the same Nite MegaHeat post heater as well as the Nite paper take-up system. This take-up is light years beyond the OEM. Have always preferred this system over the OEM. This printer also has the ink ship reset program performed.

Printer 3: This printer was purchased back in 2015 and had been a work horse. It is now a parts printer or could be resurrected if you prefer. It has the ink chip reset and a Nite post heat system as well as the OEM take-up.

Printers 1 and 2 have had all new ink lines, wiper and carriage assemblies replaced by Axiom earlier this year. In all actuality, I believe there are either two or three new heads in these machines but would have to go back and look at my records.

These printers are offered as-is and would be great starter printers. I am not interested in crating these machines for shipping so the buyer would need to make arrangements to have a third party do this or simply pick them up at my location. The selling price is 12,900.00 and included with the purchase I will throw in several rolls of SupremeJet Tacky 492 as well as 16 liters of ink which is around 2k in value alone.

I can be reached at 270-883-2702 if you have any questions.

Attached Thumbnails