DigitSmith

Need help with an older M&M Exposure Unit.

Reply
 
Thread Tools Search this Thread
Old August 6th, 2020, 03:23 PM   #1 (permalink)
antiflowershowmovement antiflowershowmovement is offline
Junior Member
Join Date:
Aug 2020
Posts:
2
Liked:
0 times
Default Need help with an older M&M Exposure Unit.

Hello, I was hoping someone could possible assist me in fixing a Nuarc M&M First Light 2532.

I just purchased this second hand with out a vacuum pump for $125. All of the lights work and the digital timer, except it did not come with a vacuum pump.
I can't seem to find a replacement pump online so I have reached out to M&M to see if they can assist, but I had a few questions in particular.

Could I possible buy a second hand pump like the one below? I saw a DIY exposure unit set up on here, and was thinking I could possible follow the same method with his pump and tubes, and replacing the blanket. I don't have much knowledge with setting up a pump, but I believe if I can get pointed to the correct tube sizes and adapters I need, I can piece it together.

Pump: https://www.harborfreight.com/25-cfm...ump-98076.html

I was also curious, could I possible get by without a vacuum pump? If I seal the hole on the blanket, and provided weight on top of my screen to keep the design from moving, could I possible get by with this?

Thank you again.
Send a private message to antiflowershowmovement ContactReply & Quote
Old August 7th, 2020, 11:33 AM   #2 (permalink)
antiflowershowmovement antiflowershowmovement is offline
Junior Member
Join Date:
Aug 2020
Posts:
2
Liked:
0 times
Default Re: Need help with an older M&M Exposure Unit.

Bump
Send a private message to antiflowershowmovement ContactReply & Quote
Old September 8th, 2020, 12:58 AM   #3 (permalink)
Victor878 Victor878 is offline
Junior Member
Join Date:
Aug 2018
Posts:
2
Liked:
0 times
Default Re: Need help with an older M&M Exposure Unit.

Quote:
Originally Posted by antiflowershowmovement View Post
Bump
Hey. Yes, you will succeed. any vacuum pump can be supplied. it will need to be enabled in advance. after pumping the ransom on the table, turn on the lamp. in the menu, set the vacuum to 0.
Send a private message to Victor878 ContactReply & Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Older M&R NuArc 3140 Metal Halide Exposure Unit Brian Greul Used Screen Printing Equipment 11 August 5th, 2018 12:42 AM
NU ARC Megalight Exposure Unit TWHPRINTING Used Screen Printing Equipment 1 February 9th, 2016 06:12 PM
Vastex E-1000 Exposure Unit - $700 Ghostwork Ink Used Screen Printing Equipment 3 February 2nd, 2016 07:11 PM
2013 Vastex E-1000 Exposure Unit - $800 Ghostwork Ink Used Screen Printing Equipment 13 December 7th, 2015 11:10 AM
Price Reduced Must Move All In One Exposure Unit With Vaccum Unit National Xp5000 freedomprinting Old Screen Printing Ads 0 June 23rd, 2007 08:39 PM

All times are GMT -4. The time now is 03:44 AM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2021, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.