DigitSmith

new member

Reply
 
Thread Tools Search this Thread
Old September 4th, 2012, 05:32 PM   #1 (permalink)
deaugustine deaugustine is offline
Junior Member
Join Date:
Sep 2012
Posts:
2
Liked:
0 times
Default new member

Hi everyone I stumbled on to this blog because I have a problem. broblem being I blew compressed air into my power supply Tajima C904 blew something the whole machine died I did notice a sparl in the direction of the power board, next mistake was not un plugging the machine from the wall then setting the breaker that blew in my main breaker box and attempting to plug the machine back in pow the house breaker blew again, I have the power supply apart ang the only burnt marks are behind 3 ceramic resistors on the power board I remover the resistors ang checked them with an ohm meter, they all seem to be good, but the foil on the board was broken. I re installed the resistors and jumped across the break with wire, but now I am afraid to plug it in. I have been talking to a company called Masis, has anyone had a history with them? any help would be appriciated.
frank
Send a private message to deaugustine ContactReply & Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Member Milwaukee, WI ryan5412 Member Introductions 0 July 27th, 2012 10:42 AM
New Member tmgoodacre Member Introductions 0 February 18th, 2012 10:55 AM
New Member bobcap Member Introductions 0 January 12th, 2012 01:35 PM
New member atakan Member Introductions 0 January 4th, 2012 07:33 PM
Lets keep a member of this forum in our thoughts tshirt outlet Old Screen Printing Ads 0 December 14th, 2009 01:49 AM

All times are GMT -4. The time now is 03:48 PM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.