DigitSmith

New Member Hello

Reply
 
Thread Tools Search this Thread
Old April 16th, 2013, 02:32 PM   #1 (permalink)
cekslmiller cekslmiller is offline
Junior Member
Join Date:
Apr 2013
Posts:
1
Liked:
0 times
Default New Member Hello

Hello,

I have been embroidering on a Bernina Artista 200E for about 7 years now. During this time I have learned a lot about thread, needles, and stabilizers. I have embroidered on many different materials and items. I recently embroidered 6 horse saddle pads for my daughter's trainer. I didn't know if my machine would embroider so thick an item, but with a jeans needle it did. Everything I have asked my Bernina to embroider on, it has.

I am starting my research into the commercial embroidery machine arena. I just went to my first ISS show in Orlando last week (4/12/2013). It was a good learning experience. However, I did not see as many embroidery machine vendors as I expected. I have not yet decided on a type or a brand of commercial machine. I am still in the research phase of my decision. The vendors were not happy to learn that I was there to do research, not buy, but I will not be pressured into making a quick decision.

I'm interested in learning more about commercial embroidery machines. Any tips and info on this topic will be very much appreciated. I live in the greater Tampa Florida area.
Send a private message to cekslmiller ContactReply & Quote
Old April 17th, 2013, 11:09 PM   #2 (permalink)
LogoAdvantage LogoAdvantage is offline
Member
Join Date:
Jan 2011
Posts:
54
Liked:
15 times
Default Re: New Member Hello

As a machine vendor that was at the Orlando ISS show I sure hope you got to see our equipment running at the event and that I got to speak with you as well.

I never expect to close that many machines sales at a show and I do not like to PUSH people to purchase.

Most people like to watch the machines run at the show and then make their buying decisions after the event.

To me its all about being at the show and letting people see your equipment running in person and then asnwering their questions.

I personally was working in the booth with Balboa Thread Works and running their designs on a ZSK Sprint 5 machine.

I did sell a few machines at the show however the idea of me being there was just to let people see the equipment in person and explain the benefits of the ZSK Brand.

I agree this ISS show was much smaller than it was in past years, however most if not all of the machine Companys were present.

I sure hope that I got to speak with you at the show and that you took the time to watch our machine running ! Production on ZSK is one of the best selling features and by far we were the most productive machine at the event !

Good luck with your research !

Rick

Quote:
Originally Posted by cekslmiller View Post
Hello,

I have been embroidering on a Bernina Artista 200E for about 7 years now. During this time I have learned a lot about thread, needles, and stabilizers. I have embroidered on many different materials and items. I recently embroidered 6 horse saddle pads for my daughter's trainer. I didn't know if my machine would embroider so thick an item, but with a jeans needle it did. Everything I have asked my Bernina to embroider on, it has.

I am starting my research into the commercial embroidery machine arena. I just went to my first ISS show in Orlando last week (4/12/2013). It was a good learning experience. However, I did not see as many embroidery machine vendors as I expected. I have not yet decided on a type or a brand of commercial machine. I am still in the research phase of my decision. The vendors were not happy to learn that I was there to do research, not buy, but I will not be pressured into making a quick decision.

I'm interested in learning more about commercial embroidery machines. Any tips and info on this topic will be very much appreciated. I live in the greater Tampa Florida area.
Send a private message to LogoAdvantage ContactReply & Quote
Old April 18th, 2013, 02:59 PM   #3 (permalink)
vitordigitizing vitordigitizing is offline
Junior Member
Join Date:
Apr 2013
Location:
Blumenau-SC BRAZIL
Posts:
5
Liked:
0 times
Default Re: New Member Hello

Already work with Tajima, Barudan, SWF, SZK, TOYOTA and HAPPY, all industrial machines, with 1 to 20 heads.

Now I running a small HAPPY VOYAGER MACHINE, I don t have tech in my area, and machine running great since 2007.
Send a private message to vitordigitizing ContactReply & Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Member rolatrolat Member Introductions 0 October 1st, 2012 01:50 PM
New Member cjones416 Member Introductions 0 September 27th, 2012 02:46 AM
New Member Milwaukee, WI ryan5412 Member Introductions 0 July 27th, 2012 11:42 AM
New member atakan Member Introductions 0 January 4th, 2012 08:33 PM
Lets keep a member of this forum in our thoughts tshirt outlet Old Screen Printing Ads 0 December 14th, 2009 02:49 AM

All times are GMT -4. The time now is 03:17 AM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2020, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.