July 21st, 2010, 05:43 PM
|
#1 (permalink)
|
|
Member
- Join Date:
- Jun 2010
- Posts:
- 40
- Liked:
- 0 times
|
Out of business everything must go!!!!
Info on equipment:
The Lawson Mini-Trooper xl and the (2) Quartz Shuttle Flash Dryers and compressor were purchased new
in August of 2005 but were not put in use until June of 2006. They do not have many hours on them and
are in excellent condition and are regularly maintained. The press is a 5 color 6 station automatic with
individual head control, flood and stroke speed adjustment, micro registration, remote set-up box,
auto and manual indexing switch, double stroke switch, flash mode switch, single/double flash switch
and foot pedal. Comes with squeegees and adult and youth platens. The (2) flashes have separate
"in and out" speed controls and "dwell" time control and of course temperature control. Also the press
is only 8' in diameter. The press requires 110V, 2A single phase connection and needs at least a 5 HP
60 GAL. 175 psi compressor with air dryer, which I am also selling. The flash units require a 230V,
20A, single phase connection. The compressor uses a 230V, 20A, single phase connection and the air
dryer uses 110V, 10A, single phase connection. It is also a rotary screw type and is very quiet. I am
asking $15,000 for the press and the (2) flash dryers. Purchased for $28,000. For the compressor $3,000.
Purchased for $5,000. The dryer is an M&R Sprint Gas Fired type with 8' of "in-feed" and 8' of heat and
8' of "out-feed". It was purchased new in 1995 and has been a great dryer, needing only to replace only
(1) motor bearing since I bought it. It has all digital controls and read-out as well as belt speed and temp
control. It needs 208/240V, 10A, 3 phase connection. It has been regularly maintained on a weekly basis.
It is in good condition but could use a new belt. I am asking only $5,500 for it. The wash-out/reclaim booth
with backlights is from Hydro Engineering Inc. and was also purchased new in 1995 for $8,000. It is 3 1/2 ft.
by 4 ft. by 4 ft. inside dimensions. It has also been maintained on a regular basis and was recently cleaned
and re-sealed to bring it to near new condition. It requires 115V, 5A, single phase connection. Asking $3,500
The other press is from Chaparral and is a 6 color 6 station manual with rotating platens. It has off-contact
adjustment and micro registration. Also has side clamps that give it stability and comes with a variety of
platens (youth, adult,long and short sleeve, shorts and a jacket hold down unit). Also a hold down unit I
made for printing polyester or nylon multicolor shorts or pocket logos for jackets. Asking $3,500 also
includes many different size and durometer squeegees. It is in great working condition.
I have included many pics of the equipment.
Thank you, Jerry
Last edited by silkworm; July 23rd, 2010 at 01:25 AM.
Reason: make a correction
|
|
|
|
