August 12th, 2011, 02:09 PM
|
#2 (permalink)
|
|
Member
- Join Date:
- May 2011
- Posts:
- 59
- Liked:
- 0 times
|
Re: Question on Upper Thread Cut Stop
It probably means that the tension spring on top thread is not getting off the brass. If the tension feels right, loosen the hex nut the immobilizes the top tension wheel, crack it loose and put a screw driver between the two splines of the split screw ends and turn it counter clockwise until the tension spring comes off the brass, and then retighten the hex. Done.
|
|
|
|
