Replaced Main board on Roland CM-24 what now?

Fraser · October 28th, 2008, 01:24 AM

Hopefully I came to the right place.
I bought a CM-24 with a known bad main board. I removed and replaced the main board with a new one from Roland.
When powered up the pause light blinks and there is no power light, no fan running, no servo movement.
Do I need to load this thing up with a driver?
Thanks
Scott

Mac Nifty · February 20th, 2009, 01:13 AM

t please let me know too

shivam · July 17th, 2009, 11:03 PM

[QUOTE=Fraser]Hopefully I came to the right place.
I bought a CM-24 with a known bad main board. I removed and replaced the main board with a new one from Roland.
When powered up the pause light blinks and there is no power light, no fan running, no servo movement.
Do I need to load this thing up with a driver?
Thanks

baluka10 · July 25th, 2009, 05:39 PM

I would check the power going into the board test the voltage. maybe the original board is still good. maybe your control pad is burnt out.