DigitSmith

Roland SP540V Printer/Plotter with Take up Reel

Closed Classified Ad
 
Classified Ad Tools Search this Classified Ad
Old January 31st, 2012, 01:26 PM   #1 (permalink)
Elite Design Elite Design is offline
Junior Member

Elite Design's Avatar
Join Date:
Nov 2008
Location:
Green Cove Springs, FL
Posts:
6
Liked:
0 times
Default Roland SP540-V **VIDEO ADDED 2/2/12**

State/Province: Florida
City: Green Cove Springs
Video Here <----

Prints Banners, Vinyl, Decals, Art Canvas, Posters and much more - also contour cuts your vinyl prints

Roland Versaworks RIP, and PrintServer software included!

Also virtually brand new in cartridges (C,M,Y,K all over 75%) valued at over $500.00

This printer was purchased in 2010 for my sign shop and has been a real workhorse!
Never had any problems with it and all maintainance has been taken care of.

Printer was purchased with the media take up reel which will keep your prints off the floor if you're running it over night.


___
Specifications

54" wide printer
ECO-SOL MAX Inks 220 or 440 cc ink cartrides
Up to 1440 x 1440 dpi resolution


Printing/Cutting method Printing Piezo ink-jet method /Media moving method
Printing/Cutting width 7-5/16 to 53 in.


Acceptable media widths 8-5/16 to 54 in.
Acceptable tools CAMM-1 series cutter blade.
Ink cartridges Type Exclusive ECO-SOL MAX INK cartridges
Capacity Choose from 440 or 220 cc cartridges +/- 5 cc each
Color Cyan, Magenta, Yellow, Black
Printing resolution Max. 1440 dpi
Setting range for the heater temperature Pre-heater 86 to 122 F< (30 to 50C)
Dryer 86 to 122 F (30 to 50C)
Distance accuracy (when cutting) Error of less than +/- 0.4% of distance traveled, or +/- 0.3 mm, whichever is greater. When distance correction ([CALBRATION] -[CUTTING ADJ.]) has been preformed: error of less than +/- 0.2 % of distance preformed, or +/- 0.1mm, whichever is greater.
Distance Accuracy (when printing) While the print heater and dryer are running. Error of less than +/- 0.4 % of the distance traveled, or +/- 0.5mm, whichever is greater.
While the print heater or dryer are not running Error of less than +/- 0.3 % of distance traveled, or +/- 0.3mm, whichever is greater.
Cutting Speed 11.8 in/sec
Blade force 30 to 300 gf
Blade offset compensation 0 to 1.5 mm
Repetition accuracy (when cutting) 0.1 mm or less (excluding stretching/contraction of the media)
Repetition between printing and cutting +/- 0.5mm max. at 75F (25C) (excluding possible shift caused by expansion/contraction of the
media and/or by reloading the media)
Interface Ethernet (10 BASE-T / 100 BASE-TX, automatic switching)
Power-saving function Automatic sleep feature (Compliant with the International ENERGY STAR Office Equipment Program)
Power supply Voltage and frequency AC 100 to 120 V +/- 10% 50/60 Hz or AC 220 to 240 V +/- 10% 50/61 Hz
Required power capacity 8.8 A (100 to 120 V) or 4.7 A (220 to 241V)
Power consumption Printing mode Approx. 1080W (100 to 120 V) or 1230 W (220 to 240V)
Sleep mode Approx. 30W
Acoustic noise level Printing mode 64 dB (A) or less (according to ISO 7779)
Standby mode 40 dB (A) or less (according to ISO 7779)
Dimensions (with stand) 94.9?[W] x 31.5?[D] x 50.9?[H]
Weight (with stand) 328 lbs.
Packed dimensions 100.1"[W] x 32.7"[D] x 47.4"[H]
Packed weight 440 lb.
Environment Power on Temperature: 59 to 90F (15 to 32C)
68F (20C) or more recommended
Humidity: 35 to 80% (no condensation)
Power off Temperature: 41 to 104F (5 to 40C)
Humidity: 20 to 80% (no condensation)


Included items Exclusive stand, power cord, small media clamps, large media clamps, blade, blade holder, replacement blade for separating knife, cleaning kit and manuals

I've closed my shop and no longer have the space or demand for this machine, I would love to see it go somewhere that it will get a lot of use.

$12,500 OBO (MAKE ME AN OFFER!!!)
Attached Thumbnails
Roland SP540V Printer/Plotter with Take up Reel-imag0277.jpg   Roland SP540V Printer/Plotter with Take up Reel-imag0069.jpg   Roland SP540V Printer/Plotter with Take up Reel-firstwrap.jpg  

Last edited by Elite Design; February 2nd, 2012 at 03:57 PM. Reason: Add Photo
Send a private message to Elite Design Contact
Old February 3rd, 2012, 11:38 AM   #2 (permalink)
Elite Design Elite Design is offline
Junior Member

Elite Design's Avatar
Join Date:
Nov 2008
Location:
Green Cove Springs, FL
Posts:
6
Liked:
0 times
Default Re: Roland SP540V Printer/Plotter with Take up Reel

Video of printing and contour cutting added yesterday!
Send a private message to Elite Design Contact
Old February 6th, 2012, 01:05 PM   #3 (permalink)
Elite Design Elite Design is offline
Junior Member

Elite Design's Avatar
Join Date:
Nov 2008
Location:
Green Cove Springs, FL
Posts:
6
Liked:
0 times
Default Re: Roland SP540-V **VIDEO ADDED 2/2/12**

Quote:
Originally Posted by Elite Design View Post
Video Here <----
$12,500 OBO (MAKE ME AN OFFER!!!)
PRICE REDUCED TO $11,500 OBO!

(I will not accept low ball offers, I know what I have and what it's worth...)
Send a private message to Elite Design Contact
Old February 7th, 2012, 01:22 AM   #4 (permalink)
s.wabwire s.wabwire is offline
Junior Member
Join Date:
Feb 2012
Posts:
0
Liked:
0 times
Default Re: Roland SP540-V **VIDEO ADDED 2/2/12**

Quote:
Originally Posted by Elite Design View Post
Video Here <----

Prints Banners, Vinyl, Decals, Art Canvas, Posters and much more - also contour cuts your vinyl prints

Roland Versaworks RIP, and PrintServer software included!

Also virtually brand new in cartridges (C,M,Y,K all over 75%) valued at over $500.00

This printer was purchased in 2010 for my sign shop and has been a real workhorse!
Never had any problems with it and all maintainance has been taken care of.

Printer was purchased with the media take up reel which will keep your prints off the floor if you're running it over night.


___
Specifications

54" wide printer
ECO-SOL MAX Inks 220 or 440 cc ink cartrides
Up to 1440 x 1440 dpi resolution


Printing/Cutting method Printing Piezo ink-jet method /Media moving method
Printing/Cutting width 7-5/16 to 53 in.


Acceptable media widths 8-5/16 to 54 in.
Acceptable tools CAMM-1 series cutter blade.
Ink cartridges Type Exclusive ECO-SOL MAX INK cartridges
Capacity Choose from 440 or 220 cc cartridges +/- 5 cc each
Color Cyan, Magenta, Yellow, Black
Printing resolution Max. 1440 dpi
Setting range for the heater temperature Pre-heater 86 to 122 F< (30 to 50C)
Dryer 86 to 122 F (30 to 50C)
Distance accuracy (when cutting) Error of less than +/- 0.4% of distance traveled, or +/- 0.3 mm, whichever is greater. When distance correction ([CALBRATION] -[CUTTING ADJ.]) has been preformed: error of less than +/- 0.2 % of distance preformed, or +/- 0.1mm, whichever is greater.
Distance Accuracy (when printing) While the print heater and dryer are running. Error of less than +/- 0.4 % of the distance traveled, or +/- 0.5mm, whichever is greater.
While the print heater or dryer are not running Error of less than +/- 0.3 % of distance traveled, or +/- 0.3mm, whichever is greater.
Cutting Speed 11.8 in/sec
Blade force 30 to 300 gf
Blade offset compensation 0 to 1.5 mm
Repetition accuracy (when cutting) 0.1 mm or less (excluding stretching/contraction of the media)
Repetition between printing and cutting +/- 0.5mm max. at 75F (25C) (excluding possible shift caused by expansion/contraction of the
media and/or by reloading the media)
Interface Ethernet (10 BASE-T / 100 BASE-TX, automatic switching)
Power-saving function Automatic sleep feature (Compliant with the International ENERGY STAR Office Equipment Program)
Power supply Voltage and frequency AC 100 to 120 V +/- 10% 50/60 Hz or AC 220 to 240 V +/- 10% 50/61 Hz
Required power capacity 8.8 A (100 to 120 V) or 4.7 A (220 to 241V)
Power consumption Printing mode Approx. 1080W (100 to 120 V) or 1230 W (220 to 240V)
Sleep mode Approx. 30W
Acoustic noise level Printing mode 64 dB (A) or less (according to ISO 7779)
Standby mode 40 dB (A) or less (according to ISO 7779)
Dimensions (with stand) 94.9?[W] x 31.5?[D] x 50.9?[H]
Weight (with stand) 328 lbs.
Packed dimensions 100.1"[W] x 32.7"[D] x 47.4"[H]
Packed weight 440 lb.
Environment Power on Temperature: 59 to 90F (15 to 32C)
68F (20C) or more recommended
Humidity: 35 to 80% (no condensation)
Power off Temperature: 41 to 104F (5 to 40C)
Humidity: 20 to 80% (no condensation)


Included items Exclusive stand, power cord, small media clamps, large media clamps, blade, blade holder, replacement blade for separating knife, cleaning kit and manuals

I've closed my shop and no longer have the space or demand for this machine, I would love to see it go somewhere that it will get a lot of use.

$12,500 OBO (MAKE ME AN OFFER!!!)
Hi, I could afford to pay USD 7,500, I will need to ship it to Africa- Kenya.

kindly confirm if this offer is acceptable to you.
Send a private message to s.wabwire Contact
Old February 7th, 2012, 11:25 AM   #5 (permalink)
Elite Design Elite Design is offline
Junior Member

Elite Design's Avatar
Join Date:
Nov 2008
Location:
Green Cove Springs, FL
Posts:
6
Liked:
0 times
Thumbs down Re: Roland SP540-V **VIDEO ADDED 2/2/12**

Quote:
Originally Posted by s.wabwire View Post
Hi, I could afford to pay USD 7,500, I will need to ship it to Africa- Kenya.

kindly confirm if this offer is acceptable to you.


(I will not accept low ball offers, I know what I have and what it's worth...)
Send a private message to Elite Design Contact
Old February 9th, 2012, 02:35 PM   #6 (permalink)
graphixunlimited graphixunlimited is offline
Junior Member
Join Date:
Feb 2012
Posts:
0
Liked:
0 times
Default Re: Roland SP540V Printer/Plotter with Take up Reel

am interested in this printer - will pay $10,000
Send a private message to graphixunlimited Contact
Old February 9th, 2012, 02:41 PM   #7 (permalink)
Elite Design Elite Design is offline
Junior Member

Elite Design's Avatar
Join Date:
Nov 2008
Location:
Green Cove Springs, FL
Posts:
6
Liked:
0 times
Thumbs up Re: Roland SP540V Printer/Plotter with Take up Reel

Quote:
Originally Posted by graphixunlimited View Post
am interested in this printer - will pay $10,000
Ron, thanks for your phone call - I'll forward the info you asked for via email
__________________
Dan Froehlich
dan@elitedesignsigns.com
Send a private message to Elite Design Contact
Old February 9th, 2012, 02:51 PM   #8 (permalink)
Elite Design Elite Design is offline
Junior Member

Elite Design's Avatar
Join Date:
Nov 2008
Location:
Green Cove Springs, FL
Posts:
6
Liked:
0 times
Lightbulb Re: Roland SP540V Printer/Plotter with Take up Reel

CLICK HERE for a new video of a job run today 2.9.12
__________________
Dan Froehlich
dan@elitedesignsigns.com
Send a private message to Elite Design Contact
Old February 9th, 2012, 10:20 PM   #9 (permalink)
Elite Design Elite Design is offline
Junior Member

Elite Design's Avatar
Join Date:
Nov 2008
Location:
Green Cove Springs, FL
Posts:
6
Liked:
0 times
Default Re: Roland SP540V Printer/Plotter with Take up Reel

My mistake - graphixunlimited is not Ron, but I did send the info to you Ron if you happen to find your way back here it's all here too.
__________________
Dan Froehlich
dan@elitedesignsigns.com
Send a private message to Elite Design Contact
Old February 12th, 2012, 06:16 PM   #10 (permalink)
Elite Design Elite Design is offline
Junior Member

Elite Design's Avatar
Join Date:
Nov 2008
Location:
Green Cove Springs, FL
Posts:
6
Liked:
0 times
Arrow Re: Roland SP540V Printer/Plotter with Take up Reel

Printer is still available for purchase 2.12.20012 ($11,500 obo)

Cash/Buyer to make all shipping arrangements
__________________
Dan Froehlich
dan@elitedesignsigns.com
Send a private message to Elite Design Contact
Closed Classified Ad

Classified Ad Tools Search this Classified Ad
Search this Classified Ad:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Roland Sp-540v Plus Take Up Reel For Sale speede72 Used Digital Printing Equipment 3 June 17th, 2011 09:53 PM
For Sale: Roland SP-540v VersaCAMM 54" Printer/Cutter with take-up reel simoncab2 Used Sign Making Equipment 1 September 27th, 2010 01:21 PM
roland versacamm 540-v with take up reel and more amp267 Used Sign Making Equipment 10 June 16th, 2010 01:45 PM
roland versacamm 540-v with take up reel and more amp267 Used Digital Printing Equipment 8 June 16th, 2010 01:44 PM
roland versacamm 540-v with take up reel and more amp267 Old Screen Printing Ads 0 July 8th, 2009 05:48 PM

All times are GMT -4. The time now is 09:55 PM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.