DigitSmith

Roland Tech

Reply
 
Classified Ad Tools Search this Classified Ad
Old July 25th, 2009, 05:58 PM   #1 (permalink)
baluka10 baluka10 is offline
Junior Member
Join Date:
Jul 2009
Posts:
4
Liked:
0 times
Default Roland Tech

I have been working with a Roland sp540v after spending thousands on repairs and tech calls i started to learn about servicing the machinesmyself here is the list of service features I have to offer:

- Encoder strip replacement and calibration
- Head replacement / nipple replacement / allignment
- ink line trouble shooting
- Replace main board fuses
- ink assembly
- calibrations and software setup.

with this knowledge we are going on 2 years without a service call. In addition I have learned to work on HP 5000 / 5500

- replaced drive belt
- replaced print carriage
- converted from pigment to UV

My third experience came with working on a damaged Epson 9800

- troubleshoot error codes
- retention of belt
- setup and configuration to work with film rips

Knowledge of setting up rips / wasatch / versworks
PC / Mac networks and software

so looking to get into this field any advice would be appreciated.
Send a private message to baluka10 ContactReply & Quote
Reply

Classified Ad Tools Search this Classified Ad
Search this Classified Ad:

Advanced Search


All times are GMT -4. The time now is 02:58 PM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.