April 24th, 2020, 02:28 PM
|
#1 (permalink)
|
Junior Member
- Join Date:
- Oct 2019
- Posts:
- 0
- Liked:
- 0 times
|
SRoque (ROQ) Automatic Printing and Dark Room Equipment (Complete Shop Package)
State/Province:
Massachusetts
City:
Brockton
Hello all. We're looking to sell the following equipment, all in great working order and currently in production:
Screen printing production equipment:- SRoque ROQ YOU 8/10 M Automatic Screen Printing Press (2014 [installed early 2015]) capable of running a left chest @ 1000 units per hour
MODEL: ROQPRINTYOUP10008M
AIR PRESSURE: 0.7 MPA/100 PSI
PHASE: 3 @ 220/230
AMPERAGE: 26A
Impressions: ~800K (as of October 2019)
ALSO INCLUDED:
10 x Adult Platens @ 16" w
10 x Youth Platens @ 14" w
5 x Action Engineering Lifting Sleeve Platens @ 3.5" w
10 x 16" squeegees with matching flood bars
5 x 5" squeegees with matching flood bars
- Roq Dry Evolution 10000L Quartz Flash "Smart Flash" with Probe (2014 [installed early 2015])
MODEL: ROQDRYEVO10000L
AIR PRESSURE: 0.7 MPA/100 PSI (hooks into press)
PHASE: 3 @ 220/230
AMPERAGE: 6A
- RoqTunnel Natural Gas Conveyor Dryer (installed late 2017) capable of curing water based and discharge prints up to 1000 pieces per hour: https://3518025.app.netsuite.com/cor...ff69c&_xt=.pdf
CHAMBER SIZE: 106" x 59" so roughly 9' x 5' of uniform heat with 5' in and 5' out
MODEL: ROQTUNNELT3015G
PHASE: 3 @ 220/230
AMPERAGE: 6A
Dark room equipment:- FX LED Exposure Unit (installed mid-2016)
Single-point 450W LED light exposes ULANO QTX emulsion in as quick as 7 seconds on a 230 mesh screen. Very high detail is possible with this machine.
PHASE: 1 @ 115V
AMPERAGE: 12.15A
- SRoque Positive Registration Unit "PRU" with U-clamps (installed mid-2016)
Pre-register screens before you hit press for quick and accurate registration on press. Save time & money! On-press platen included.
- CCI 30 gallon dip tank (fits 6 x 23" x 31" auto frames)
- BlackLine Filter ONE Under sink filter and sump pump
- 2 x GE 70 Pint Dehumidifiers
Asking price: We'd love to see the entire package go in one shot to a shop looking to expand, or upgrade from manual to automatic equipment. Our asking price for the full package is $50,000 (over $100K new), and the buyer would be responsible for arranging transportation and installation of all equipment.
If you have any questions, please don't hesitate to reach out and ask. I am happy to provide detailed pictures of the equipment and more specifics. Please, only get in touch if you're serious.
Justin
Last edited by strangeplanetprinting; April 24th, 2020 at 04:54 PM.
|
|
|