DigitSmith

Swf 1501c

Reply
 
Thread Tools Search this Thread
Old January 17th, 2015, 03:09 PM   #1 (permalink)
Suzy Suzy is offline
Junior Member
Join Date:
Aug 2014
Posts:
3
Liked:
1 times
Default Swf 1501c

I removed the s/s rollers on the head to clean, free up and lubricate them so they would glide; however somehow when I put them back in, I got the embroidery head out of sync with the computer and I am not quite sure how to get them back together. Does anyone have any suggestions....please do not bash SWF, we all have our opinions, I am looking for honest assistance in getting this resolved.

Thank you!
Send a private message to Suzy ContactReply & Quote
Old January 18th, 2015, 01:30 PM   #2 (permalink)
Tom G Tom G is offline
Junior Member
Join Date:
Nov 2014
Location:
florida
Posts:
5
Liked:
0 times
Default Re: Swf 1501c

remove the screws holding the color change motor on and pull the motor away from the head .Set the head aligning the needle three over the needle plate then turn on the machine press three on the control panel the motor should rotate put the motor back .

Or remove the head press three to get the motor back to the right spot then put the head back on (this is tricky if you have not done it before)
Send a private message to Tom G ContactReply & Quote
Old January 24th, 2015, 08:24 PM   #3 (permalink)
Jaylau808 Jaylau808 is offline
Junior Member
Join Date:
Aug 2014
Location:
Honolulu Hawaii
Posts:
7
Liked:
0 times
Default Re: Swf 1501c

Sounds like your color cam change is off
Send a private message to Jaylau808 ContactReply & Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
2013 swf 1501c, barely used LongBowDrvr Used Embroidery Machines 4 June 20th, 2014 08:38 PM
2012 SWF 1501C WILCOM DecoStudio E2 INCLUDED weinkitquick Used Embroidery Machines 8 November 18th, 2013 10:43 PM
SWF 1501C Embroidery Machine terrymcv Used Embroidery Machines 1 September 11th, 2013 01:28 AM
Toyota ESP9000 vs SWF 1501C jt72978 Embroidery and Digitizing 0 June 1st, 2013 09:42 AM

All times are GMT -4. The time now is 10:18 AM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.