May 15th, 2013, 01:31 PM
|
#1 (permalink)
|
Member
- Join Date:
- Apr 2011
- Posts:
- 52
- Liked:
- 4 times
|
Trimmer ONLY cuts bobbin thread
On one of our single head machines, the under trimmer only cuts the bobbin, and not the top thread. The puller hook fires and grabs the top thread, but it is still attached. This is a Tajima TMEX C1201. I does have all four required parts, the knife, the bottom thread clamp and the two clamp/knife pieces on top of the knife. If I put a piece of thread into the knife set and fire an ATH, the thread will cut. The fork that clamps the thread to the bobbin works and is in proper position. This is a new clamp set. It worked OK for an hour or so after installation, then quit working. Anybody have a clue? I'm stumped.
As a quick BTW, I have left ARTCRAFT and am now over at AMPRO (American Process Lettering).
Thanks,
Jamie Malerman
|
|
|