DigitSmith

Vacuum Exposure Unit

Reply
 
Classified Ad Tools Search this Classified Ad
Old December 7th, 2013, 02:40 AM   #1 (permalink)
ninjawhiteboy12 ninjawhiteboy12 is offline
Junior Member
Join Date:
Jan 2012
Posts:
0
Liked:
0 times
Default Vacuum Exposure Unit

State/Province: California
City: Chico
For sale is an exposure unit for screen printing. The unit has a neoprene blanket that is attached to a 3CFM vacuum pump for strong and even compression to ensure sharp lines and half tones. There are nine 24" unfiltered black light bulbs for fast exposure and also two light safe yellow bulbs to allow for film alignment and film inspection without unwanted exposure. Exposure time with my emulsion was 3 minutes. The lights are controlled by a digital PID controller with times ranging from 1 second to 99 hours. The control panel allows you to independently control the vacuum pump, light safe bulbs, and exposure times. The exposure unit's stand is also an eight screen drying rack that can accommodate 20"X24" to 23"X31" or slightly larger frames and is mounted on locking casters to allow for mobility when needed. Together an exposure unit, light table, and drying cabinet of this quality would be thousands of dollars. I would like $850.
If you have any other questions you can reach me via call/text at 530-five1five-9eight4five or send me an email and I will get back to you ASAP. Thanks for looking.

The Pictures were too large to upload, to see the unit click on the link below

http://s677.photobucket.com/user/nin...?sort=3&page=1
Send a private message to ninjawhiteboy12 ContactReply & Quote
Old December 10th, 2013, 11:37 AM   #2 (permalink)
ninjawhiteboy12 ninjawhiteboy12 is offline
Junior Member
Join Date:
Jan 2012
Posts:
0
Liked:
0 times
Default Re: Vacuum Exposure Unit

bump
Send a private message to ninjawhiteboy12 ContactReply & Quote
Old December 15th, 2013, 08:28 PM   #3 (permalink)
ninjawhiteboy12 ninjawhiteboy12 is offline
Junior Member
Join Date:
Jan 2012
Posts:
0
Liked:
0 times
Default Re: Vacuum Exposure Unit

Price drop!!!!

$700.00 takes it
Send a private message to ninjawhiteboy12 ContactReply & Quote
Old December 18th, 2013, 11:03 AM   #4 (permalink)
ninjawhiteboy12 ninjawhiteboy12 is offline
Junior Member
Join Date:
Jan 2012
Posts:
0
Liked:
0 times
Default Re: Vacuum Exposure Unit

bump
Send a private message to ninjawhiteboy12 ContactReply & Quote
Reply

Classified Ad Tools Search this Classified Ad
Search this Classified Ad:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
WANTED, Exposure Unit, single point light source with a vacuum lid. Gilligan Old Screen Printing Ads 11 March 31st, 2012 11:15 AM
Vacuum Table Point Light Exposure Unit with Inspection Lights TShirtRacer Old Screen Printing Ads 1 February 7th, 2012 10:18 PM
Wanted single point exposure unit or light for vacuum frame adrenaline apparel Old Screen Printing Ads 0 November 30th, 2011 06:32 PM
FS - Vastex Exposure Unit (Vacuum Exposure system - 120volt) (Los Angeles) bennybasics Old Screen Printing Ads 0 August 24th, 2009 02:40 AM

All times are GMT -4. The time now is 04:42 PM.
Copyright © 2011 DigitSmith. All rights reserved.
Forums software by VBulletin, Copyright © 2000-2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.