Logo-bad sewing

alexplus · January 22nd, 2018, 05:01 AM

Hello,

I hove I can fiind help here.
I have a this logo from the picture attach. How you can see the resoult is no soo good.

What to check ?

Alex.

ayugup · January 22nd, 2018, 08:09 AM

Can you post the .dst file.
To me, it looks like there is a problem with design as well as bottom tension.

alexplus · January 24th, 2018, 04:39 AM

Thank you ayugup for answer.

I attach the .dst file. Is arhivated with winzip because I can upload with .dst extension on the forum.

I thing myself that is a problem with the desing. How you can see is verry small design. This is the size I need.

And about the tension: I make the "H" test and I setup coretly the tension of machine.

Alex.

digidana · January 24th, 2018, 11:04 AM

that file is awful. sorry....but it breaks my number 1 rule. no satin stitches under 1.3 mm wide (1.2 if its for a small stretch) any satin stitches under 1.2/1.3 mm wide should be done a s a running stitch or a back stitch. you should be getting thread breaks and possibly needle breaks with this file...

ayugup · January 24th, 2018, 09:42 PM

Try this logo
The file is attached
If i had a better visual, i can see what I'm making, however this is probably the best I got
picture meaning a clipart (I'm not a professional digitizer however I know a little about digitizing).

alexplus · January 26th, 2018, 04:33 AM

digidana, you have a manual for "how to digitizing coretly" ?

ayugup, here the resoult. Much better.

Yes, the size I need is verry small, 18x16mm.

Thank you for yours support.

EmbroStitch · January 26th, 2018, 04:45 AM

I think it makes no sense to digitize all the small details

.

https://embrostitch.com/digitizing-embroidery-design/

alexplus · January 28th, 2018, 07:45 AM

Thank you to all for the support.

Yes, "EmbroStitch", you are right. Now is perfect.

alexplus · July 16th, 2018, 09:35 AM

I hope I can fiind again help here.

I have this logo to digitize. I attach my dst. file.

The write is verry small. How to do?

digidana · July 24th, 2018, 03:07 PM

start here for some basics:
general rules of thumb for digitizing...and how to spot a bad design.