10 color 12 station M&R Challenger

Miami Screen Print Supply · January 17th, 2014, 02:24 PM

Completely refurbished M&R Challenger 10 color 12 station! This automatic press was refurbished top to bottom, like new condition. This machine has new paint, has been rewired, and has new airlines. Comes with a complete set of squeegees, flood bars, and 4 complete sets of pallets- sleeve (4 X 22), 16 X 18, 12 X 22, and 18 X 22. Included are two flash cure units; 1 caged style Omni flash and 1 housing style Omni flash. Delivered and installed free of charge anywhere in the state of Florida.

This machine also comes with a $1,000 credit for any supplies (not including equipment) at www.miamiscreenprintsupply.com

$25,500.00

Miami Screen Print Supply · January 17th, 2014, 02:26 PM

Call us if you have any questions. (305) 622-7532

InkNotPaint · January 18th, 2014, 01:52 PM

What year is the machine and how many prints does it have on it?

Miami Screen Print Supply · January 20th, 2014, 10:30 AM

It is 1994. I do not know how many prints it has on it, but it was completely refurbished from top to bottom. This machine will also come with a 90 day warranty.

CGS · January 20th, 2014, 12:36 PM

It looks to be a bit older than a 1994 from the print head design and pallet arms.

Miami Screen Print Supply · January 20th, 2014, 01:49 PM

It is a 1994.

Miami Screen Print Supply · January 21st, 2014, 01:35 PM

This machine will work like brand new, because it has been completely restored and refurbished.

244 · January 21st, 2014, 03:39 PM

Quote:

Originally Posted by Miami Screen Print Supply

This machine will work like brand new, because it has been completely restored and refurbished.

Just curious. On your complete restore and refurbish do you change the center shaft bronze bushings and 6" Timpkin bearing?

CGS · January 21st, 2014, 04:48 PM

Quote:

Originally Posted by Miami Screen Print Supply

It is a 1994.

I'm pretty sure that M&R was not using those high profile pallet locks & single cylinder print heads in 94. By 94 head drive should have been Tol-o-Matic

anson578 · January 21st, 2014, 11:30 PM

In 94 they had the Tol-o-matic Index drive. The tol-o-matic stroke cylinder didn't start until 95. The single cylinder as you call it was still used on many of M&R presses throughout the late 90's and early 00's. I have a 99 Terminator with the " single cylinder ".
In 93 they still had machines with the high profile pallet locks, so it is possible they still produced some of their presses with the high profile