Outsource Embroidery Digitizing Reviews

arrowembroidery · October 11th, 2011, 11:17 AM

Quote:

Originally Posted by embrosurf

The lion pics seem to be stock designs....googled it and there it was.....

pls check this link:
http://thettablog.blogspot.com/2011/...-are-lion.html

so now do we blame embroiderysplus??

growup guys....the lion pics were sent as estimate requirements....it wasn't a matter of loosing an order of $10,000!!!!

this post is about what quality you get at different prices!!!

every digitizer is good as different areas and its always better to have a few in hand to keep safe....as an embroiderer I have 3 of which I use 2 on regular basis.

for any embroidery company out there, the best way to go about finding a right digitizer is by picking a design and send it to all potential digitizers that you have come across. on your email tell them you are giving this out to several digitizers to see the quality and pricing structure. From the results you can decide by yourself which one works for you. in future when you get spammed with new digitizers service, send them the same design to make and keep updating your results.

Forums can be bias and as mentioned earlier by another member, every embroiderer has different needs so a digitizer might work for me but not for you. So I would say give it a shot with all of them and compare the results.

yeah that's what I say, give it a shot and see the results. Now if I say I use express or abc digitiser that doesn't even mean I don't have others that work for me. But am amazed to see the kinda non-professionalism that some digitisers here might be showing to self promote themselves...Lame!

widners · October 11th, 2011, 11:56 AM

I have a strong feeling this thread is useless. Seems new users chiming in that are mysteriously pushing one company or another with all the same details and points of view as the digitizers themselves. A good thread turned useless in my opinion.

Customers are smart... Keep in mind, when all the reviews are stellar and from nothing but new users with no other posts, the actual customers won't believe them.

embrosurf · October 11th, 2011, 12:23 PM

post is definitely going out of topic.....

so if we go back and try again....from the replies that embroiderysplus got.

we can see what artworks were sent to the digitizers for a quote.

the job was given to steve. as widner requested earlier if we could see a scan of the stitchout once ready.

at the same time, the other 3 digitizers can also send sample swatches of jacket back designs with their prices. Finished. after that you can contact the digitizer whose work you liked and negotiate your own rate with them. You have the right to choose your own digitizer.

megrisoft · October 11th, 2011, 12:31 PM

Quote:

Originally Posted by widners

I have a strong feeling this thread is useless. Seems new users chiming in that are mysteriously pushing one company or another with all the same details and points of view as the digitizers themselves. A good thread turned useless in my opinion.

Customers are smart... Keep in mind, when all the reviews are stellar and from nothing but new users with no other posts, the actual customers won't believe them.

I agree with you...i am very old member of this forum and never seen such type of promotions where fake users are coming and defending own companies (Seems this thread going like the way screen printers section in this forum which was closed after too many promotions).

But as i said before, we have large client base and we have strong belief that sharing clients (fake client or original client) information is not good business practice.......I want to clear that i am not against any of these...Brent, ArrowEmbroidery, ExpressDigitzing, Steve, CheapDigitizing and other guys....this is my point of view and thinking only....

arrowembroidery · October 11th, 2011, 01:13 PM

Quote:

Originally Posted by widners

I have a strong feeling this thread is useless. Seems new users chiming in that are mysteriously pushing one company or another with all the same details and points of view as the digitizers themselves. A good thread turned useless in my opinion.

Customers are smart... Keep in mind, when all the reviews are stellar and from nothing but new users with no other posts, the actual customers won't believe them.

I totally agree, and just adding to it, Especially when you post a long list of research done in your first and only first post (referring to embroideryplus).

widners · October 11th, 2011, 01:37 PM

Quote:

Originally Posted by arrowembroidery

I totally agree, and just adding to it, Especially when you post a long list of research done in your first and only first post (referring to embroideryplus).

I wasn't only referring to one user. Lets face it, you came in fairly new also and have only promoted one company and even have a close enough relationship to know other customers order and/or quote details from said company. Either that company shared another customers information or you are involved with said company. Either way it isn't right.

Now the feeling is the whole thread is full of mis-information and untrustworthy posts from all members. With so many of such entangled, crazy posts no one would know who or what reviews to believe or trust.

So, good job. A good thread with valid reviews was run so far into the ground that nothing inside the thread can be trusted at all. The valid good reviews that were here now mean nothing because no one will trust anything in the thread.

Remember, reviewers don't just come in and only brag about one company or organization and then leave. New users aren't flocking to this message board just to post one comment in the digitizing thread. People will see you have one or very few posts and they will see that all your posts are only advertisements for one company. They aren't dumb!

People come here for valuable information and feedback and questions and input from their peers! Don't ruin it with fake/false posts and/or information so that no one can trust anything in the forums!

Gilligan · October 11th, 2011, 02:26 PM

This thread still serves a small purpose... read between the lines. Some digitizers AREN'T getting a ridiculous amount of attention from these 1 time posters. Those are the real guys that aren't here spamming this forum. Those few reviews are still trust worthy. But yes, in a sea of muck it becomes hard to find the gems.

arrowembroidery · October 11th, 2011, 02:36 PM

Quote:

Originally Posted by widners

I wasn't only referring to one user. Lets face it, you came in fairly new also and have only promoted one company and even have a close enough relationship to know other customers order and/or quote details from said company. Either that company shared another customers information or you are involved with said company. Either way it isn't right.

Now the feeling is the whole thread is full of mis-information and untrustworthy posts from all members. With so many of such entangled, crazy posts no one would know who or what reviews to believe or trust.

So, good job. A good thread with valid reviews was run so far into the ground that nothing inside the thread can be trusted at all. The valid good reviews that were here now mean nothing because no one will trust anything in the thread.

Remember, reviewers don't just come in and only brag about one company or organization and then leave. New users aren't flocking to this message board just to post one comment in the digitizing thread. People will see you have one or very few posts and they will see that all your posts are only advertisements for one company. They aren't dumb!

People come here for valuable information and feedback and questions and input from their peers! Don't ruin it with fake/false posts and/or information so that no one can trust anything in the forums!

Only one line answer to your long reply.....Just check again in the forum, Have i referred only one company? From time to time I refer to my experiences and help out other users. I would rather suggest stop filling up this thread with nonsense to take someone's side and update your knowledge before you comment about someone else!

Moderators here are more wise to know which is spam and which is not! I have been new to this forum doesn't mean you can put me to the ground and override whatever i say. Respect and get respected, that's all i can say.

arrowembroidery · October 11th, 2011, 02:39 PM

I would suggest lets end this meaning less ego-based discussion and move ahead, so we don't full up the space with scum that overshadows others reviews, let others decide for themselves. Don't try to force your opinion on them.

embrosurf · October 11th, 2011, 02:48 PM

Quote:

Originally Posted by arrowembroidery

I would suggest lets end this meaning less ego-based discussion and move ahead, so we don't full up the space with scum that overshadows others reviews, let others decide for themselves. Don't try to force your opinion on them.

totally agree as my previous post....this thread is now a waste of time